User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-107-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your ISP
connection.
Primary DNS - Enter the DNS IPv6 address in dotted-decimal notation provided by your
ISP.
Secondary DNS - Enter another DNS IPv6 address in dotted-decimal notation provided by
your ISP.
Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
Address Autoconfiguration Type – RADVD (Router Advertisement Daemon) and
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.
Site Prefix/ Site Prefix Length: - Configure the Site Prefix and Site Prefix Length. Please
contact your ISP before configuration.
LAN IPv6 Address - Display the LAN IPv6 address created by the device.
Click the Save button to save your settings.
3) PPPoEv6
Figure 5- 92 PPPoEv6
PPPoE Session - The PPP session type for IPv6 connection. There are two types: