User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-126-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
5) How to enable H323 ALG: Log in to the router, Choose menu “Advanced→Security
→Basic Security”. On the “Basic Security” page, check the Enable radio button next
to H323 ALG. Remember to click the Save button.
Figure A-7 Basic Security
4. I want to build a WEB Server on the LAN, what should I do?
1) Because the WEB Server port 80 will interfere with the WEB management port 80 on
the router, you must change the WEB management port number to avoid interference.
2) To change the WEB management port number: Log in to the router, Choose menu
“Advanced → Security → Remote Management”. On the "Remote Management"
page, type a port number except 80, such as 88, into the "Web Management Port" field.
Click Save and reboot the router.