User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-8-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
(USB)
Off
No connection.
On
A storage device or printer has connected to the USB port.
Table 1-1 The LEDs description
1.4.2 The Rear Panel
Figure 1- 2 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
Wireless On/Off: The button for the wireless function. Press and hold the wireless button
for about 2 seconds to turn it on or off.
Ethernet (1, 2, 3, 4): These ports (1, 2, 3, 4) connect the router to the local PC(s).
Internet: This port is where you will connect the DSL/cable Modem, or Ethernet.
USB: Use the USB ports for media sharing, storage sharing and printer sharing across
your local network. You can also set up an FTP server to access your files remotely through
the Internet.
On/Off: The switch for the power.
Power: The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this TL-WR1043ND 450Mbps Wireless N Gigabit Router.
WPS/Reset:
Pressing this button 1 second enables the WPS function. If your clients, such as
wireless adapters, that support Wi-Fi Protected Setup, then you can press this button to
quickly establish a connection between the router and clients and automatically