User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-16-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
Default Gateway - Your ISP will provide you with the Gateway address which is the
ISP server’s address. Enter the gateway IP address into the box if required.
Primary DNS - Enter the DNS Server IP address into the box if required.
Secondary DNS - If your ISP provides another DNS server, enter it into this field.
If the connection type is PPPoE, the next screen will appear as shown in Figure 3- 8.
Configure the following parameters and then click Next to continue.
Figure 3- 8 Quick Setup – PPPoE
Username/Password - Enter the Username and Password provided by your ISP.
These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
If the connection type is L2TP, the next screen will appear as shown in Figure 3- 9.
Configure the following parameters and then click Next to continue.
Figure 3- 9 Quick Setup – L2TP
VPN Server IP/Domain Name – Enter the VPN Server IP/Domain Name provided by
your ISP.
User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Select Static IP if IP Address/ Subnet Mask/ Gateway and DNS server address have
been provided by your ISP.