User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-17-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
If the connection type is PPTP, the next screen will appear as shown in Figure 3- 10.
Configure the following parameters and then click Next to continue.
Figure 3- 10 Quick Setup – PPTP
VPN Server IP/Domain Name – Enter the VPN Server IP or Domain Name provided
by your ISP.
User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Select Static IP if IP Address/ Subnet Mask/ Gateway and DNS server address have
been provided by your ISP.
5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3- 11.
Use the default or change the wireless settings, and click Next.