User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-18-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
Figure 3- 11 Quick Setup – Wireless
Wireless 2.4GHz - Displays the status of wireless function. You can switch it by
clicking the ON or OFF button.
Network Name (SSID) - Also called the SSID (Service Set Identification). Enter a
value of up to 32 characters. The same name must be assigned to all wireless
devices in your network. This value is case-sensitive. For example, TEST is NOT the
same as test.
Password - Create a password for your wireless network.
Note:
Note: If you change the default SSID and password, write down the new wireless settings.
6. Confirm your settings, and then click Save to continue or Back to make changes.
Figure 3- 12 Quick Setup –Summary
Note:
For wireless devices, you may have to reconnect to the wireless network if you
have changed the default network name or password in Step 5.