User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-20-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
Chapter 4. Basic
4.1 Network Map
Network Map provides a router-centered dashboard that shows you the status of your
Internet connection and network. You can click corresponding icons to view the detail
information. All the information is read-only.
Figure 4- 1 Network Map
Internet - Click to view the ISP settings of your router.
Wireless Clients - Click to view the wireless clients connected to the router currently.
Wired Clients - Click to view the wired clients connected to the router currently.
Wireless - Click to view the current settings or information for wireless.
WAN – Click to view the current information applied to the WAN port of the router. You can
configure them in the Internet page.
4.2 Internet
Choose menu “Basic → Internet”, and you can view or change the basic ISP information for
your router.
Dynamic IP
If your ISP provides the DHCP service, please choose Dynamic IP type, and the router
will automatically get IP parameters from your ISP. You can see the page as shown
below.