User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-25-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
Password - Create a password for your wireless network. The password must have a
minimum of 8 characters in length.
Click the Save button to save your settings.
4.4 Guest Network
Choosing menu “Basic → Guest Network”, you can configure the basic setting for guest
Network.
Figure 4- 8 Guest Network
Allow Guests To Access My Local Network - Click ON/OFF to enable or disable this
feature. If enabled, guests can communicate with hosts.
Wireless 2.4GHz - Click ON/OFF to enable or disable your Guest network. If enabled, the
wireless stations will be able to access the Router, otherwise, wireless stations will not be
able to access the Router.
Network Name(SSID) - Create a name (up to 32 characters) for your Guest network. The
same Name(SSID) must be assigned to all wireless devices in your Guest Network.
Password - Create a password for your wireless network. The password must have a
minimum of 8 characters in length.
Click the Save button to save your settings.