User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-44-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
Figure 5- 16 Wireless Security
Disable Security - If you do not want to use wireless security, check this radio button. But
it’s strongly recommended to choose one of the following modes to enable security.
WPA/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared
passphrase. The router is configured by this security type by default.
Version - You can choose the version of the WPA-PSK or WPA2-PSK security on the
drop-down list. The default setting is WPA2-PSK.
Encryption - You can select either TKIP or AES as Encryption. The default setting is
AES.
Note:
If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you
will find a notice in red as shown in Figure 5- 17.