User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-54-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
Storage Authority - Authority of user: Read Only or Read and Write.
Name - This folder's display name.
Partition - The volume that the folder resides.
Folder - The real full path of the specified folder.
Edit - You can edit the share folder by click edit button.
Delete - You can delete the share folder by click delete button.
Note:
If you want guests visit folders of Guest Network Storage Sharing with guest account, you must
enable Access shared storage with password on the page USB Settings->Storage Sharing, or the
guests can't access to the Guest Network Storage Sharing.
The max share folders number is 6. If you want to share a new folder when the number has
reached 6, you can delete a share folder and then add a new one.
5.6 DHCP
There are three submenus under the DHCP menu: DHCP Settings, DHCP Clients List and
Address Reservation. Click any of them, and you will be able to configure the corresponding
functions.
5.6.1 DHCP Settings
Choose menu “Advanced→DHCP→DHCP Settings”, you can configure the DHCP Server on
the page as shown in Figure 5- 27.The router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that
are connected to the router on the LAN.