User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-57-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
Figure 5- 30 Add or Modify an Address Reservation Entry
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disable All button to make all entries enabled/disabled
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the
previous page.
5.7 USB Settings
There are five submenus under the USB Settings menu: Storage Sharing, FTP Server, Media
Server, User Accounts and Print Server. Click any of them, and you will be able to configure
the corresponding function.
5.7.1 Storage Sharing
Choose menu “Advanced→ USB Settings→Storage Sharing”, and then you can configure a
USB disk drive attached to the router on this page as shown below.