User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-62-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
Figure 5- 37
FTP Server Configuration
5. Click the Start button to start the FTP Server.
Note:
1. The max share folders number is 10. If you want to share a new folder when the number
has reached 10, you can delete a share folder and then add a new one.
2. The change of the FTP settings will take effect after restarting the FTP Server.
3. Currently, the maximum number of clients that FTP Server supports is two. Therefore, if
you want to log in, make sure that less than two clients have logged in.
5.7.3 Media Server
Choose menu “Advanced→USB Settings→Media Server”, and then you can configure Media
Server on this page as shown in Figure 5- 38.
Figure 5- 38
Media Server Setting
Server Name – The name of this Media Server.