User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-63-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
Server Status - Indicates the Media Server’s current status, started or stopped. You can
click the Start button to start the Media Server and click the Stop button to stop it.
Name - The display name of this folder.
File System - The file system type on the partition can be FAT32 or NTFS.
Folder - The real full path of the specified folder.
Delete - You can delete the share folder by click Delete.
To set up your media server, please follow the instructions below:
1) Plug an external USB hard disk drive or USB flash drive into this router, and then the
screen will appear as shown in Figure 5- 39.
Figure 5- 39 Media Server Setting
2) Click the Start button to start the media server, and then the screen will appear as shown
in Figure 5- 40.
Figure 5- 40
Media Server Setting
3) Click the Add share folder button to specify a folder as the search path of media server.
The screen will then appear as shown in Figure 5- 41.