User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-67-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
switch from 192.168.0.1 to 192.168.1.1 to avoid IP conflict; in this case, please try net use
\\192.168.1.1 /delete / yes.)
5.7.5 Print Server
Choose menu “Advanced→ USB Settings→ Print Server”, you can configure print server on
this page as shown below.
Figure 5- 45 Pint Server Setting
There are two states of the print server, described as follows:
Online - Indicates the print server has been turned on. You can click the "Stop" button to
stop the print server.
Offline - Indicates the print server feature is disabled. You can click "Start" button to start
it.
5.8 NAT Boost
Choose “Advanced→NAT Boost”, and you can enable or disable the NAT and Hardware NAT
Control feature. The NAT Rules and Hardware NAT will work properly only when the NAT
Control feature is enabled.
Figure 5- 46 NAT Control Setting
Enable NAT Control - If enabled, the NAT function and the Forwarding configuration
will take effect.
Disable NAT Control - If disabled, neither NAT function nor forwarding configuration
will take effect.
Enable Hardware NAT Control - If enabled, the Hardware NAT feature will take effect.