User Manual

-88-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
1) In Host Description field, create a unique description for the host, e.g. Host_1.
2) In MAC Address field, enter the MAC address.
Figure 5- 68 Add or Modify a Host Entry
3. Click the Save button to complete the settings.
Click the Delete All button to delete all the entries in the table.
Click the Next button to go to the next page, or click the Previous button to return to the
previous page.
For example: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA, you should first follow the settings below:
1. Click Add New... button in Figure 5- 66 to enter the Add or Modify a Host Entry page.
2. In Mode field, select MAC Address from the drop-down list.
3. In Host Description field, create a unique description for the host (e.g. Host_1).
4. In MAC Address field, enter 00-11-22-33-44-AA.
5. Click Save to complete the settings.
Then you will go back to the Host Settings page and see the following list.
5.12.3 Target
Choose menu “Advanced→Access Control→Target”, and then you can view and set a Target
list in the screen as shown in Figure 5- 69. The target list is necessary for the Access Control
Rule.
Figure 5- 69 Target Settings