User Manual
Table Of Contents
- Package Contents
- Introduction
- Connecting the Router
- Quick Installation Guide
- Basic
- Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
-92-
TL-WR1043ND
450Mbps Wireless N Gigabit Router
5.13 Advanced Routing
There are two submenus under the Advanced Routing menu: Static Routing List and System
Routing Table. Click any of them, and you will be able to configure the corresponding function.
5.13.1 Static Routing List
Choose menu “Advanced → Advanced Routing → Static Routing List”, and then you can
configure the static route in the next screen (shown in Figure 5- 74). A static route is a
pre-determined path that network information must travel to reach a specific host or network.
Figure 5- 74 Static Routing
To add static routing entries:
1. Click Add New… shown in Figure 5- 74, you will see the following screen.
Figure 5- 75 Add or Modify a Static Route Entry
2. Enter the following data:
Destination Network - The Destination Network is the address of the network or host
that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.