TL-WR340G/TL-WR340GD User Guide 54M Wireless Router Rev：1.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2007 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Package contents The following contents should be found in your box: ¾ One TL-WR340G/TL-WR340GD 54Mbps Wireless Router ¾ One AC power Adapter for TL-WR340G/TL-WR340GD 54Mbps Wireless Router ¾ Quick Installation Guide ¾ One Resource CD for TL-WR340G/TL-WR340GD 54Mbps Wireless Router, including: • This Guide • Other Helpful Information ) Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the product for assistance.
COMMENT Chapter 1. Introduction ........................................................................................ 1 1.1 Product Overview ...................................................................................................... 1 1.2 Main Features ........................................................................................................... 1 1.3 Overview the User Guide .......................................................................................... 2 1.
3.9 3.8.1 Firewall ...........................................................................................................................38 3.8.2 IP Address Filtering ........................................................................................................39 3.8.3 Domain Filtering .............................................................................................................41 3.8.4 MAC Filtering.......................................................................
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Chapter 1. Introduction 1.1 Product Overview Thank you for choosing the TL-WR340G/TL-WR340GD 54Mbps Wireless Router. This router provides dedicated solution for Small Office/Home Office (SOHO) networks. With your network all connected, your local wired or wireless network can share Internet access, files and fun for multiple PCs through one ISP account. It is an easy Web-based setup for installation and management.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide policies based on time of day for children or staff. 1.3 Overview the User Guide Chapter 1: Introduction Chapter 2: Hardware Installation Guide Chapter 3: Software Installation Guide Chapter 4: Appendix 1.4 Conventions The Router or TL-WR340G/TL-WR340GD, or device mentioned in this User guide stands for TD-WR340G/TL-WR340GD 54M Wireless Router without any explanations.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LED indicators displayed on the front panel, the status of these LED indicators represent the device’s working circs. For details, please refer to 2.1.1 LED Explanation 2.1.
TL-WR340G/TL-WR340GD 2.2 54M Wireless Router User Guide The Back Panel Figure 2-2 ¾ Antenna: Used for wireless operation and data transmit. ¾ Reset Button: There are two ways to reset the Router's factory defaults. Press the reset button of the Router, and then power on the Router, hold reset button pressed down for about five seconds, or restore the default setting from “Management - Settings - Restore Default “of the Router's Web-based Utility.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide connectors ¾ TCP/IP protocol must be installed on each PC ¾ Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later 2.4 Installation Environment Requirements ¾ The Product should not be located where it will be exposed to moisture or excessive heat. ¾ Place the Router in a location where it can be connected to the various devices as well as to a power source.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 2-3 Hardware Installation of the Router 2.6 Configure PC Your PC needs a network adapter. You may directly connect your adapter to the Router, or you may connect your adapter to a Hub/Switch, and then connect the Hub/Switch to the Router. Follow the instructions below to configure a computer running Windows XP to be a DHCP client. 1. From the Start menu on your desktop, go to Settings, and then click on Network Connections.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 2-4 2. In the Network Connections window, right-click on LAN (Local Area Connection), then click Properties. Figure 2-5 3. In the General tab of Internet Protocol (TCP/IP) Properties menu, highlight Internet Protocol (TCP/IP) under “This connection uses the following items:” by clicking on it once.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Click on the Properties button. Figure 2-6 4. Select “Obtain an IP address automatically” by clicking the radio-button. Click OK Figure 2-7 ¾ Configure the IP address manually 1. Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between 2 to 254, Subnet mask is 255.255.255.0, Gateway is 192.168.1.1, DNS address is the value provided by ISP).
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Now, you can run the Ping command in the command prompt to verify the network connection between your PC and the Router. The following example is in Windows XP Operating System. 2. Open a command prompt, From the Start menu on your desktop, select run tab, type cmd in the field, and type ping 192.168.1.1 on the screen that appears, and then press Enter.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Chapter 3. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation, For advanced users, if you want to know more about this device and make use of its functions adequately, you need to read this chapter and configure advanced settings though the Web-based Utility. 3.1 Login After your successful login, you can configure and manage the device.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-1 Router Status 3.
TL-WR340G/TL-WR340GD 3.4 54M Wireless Router User Guide Network Figure 3-2 the Network menu There are three submenus under the Network menu (shown in Figure 3-2): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 3.4.1 LAN You can configure the IP parameters of LAN on this page. Figure 3-3 LAN ¾ MAC Address - The physical address of the router, as seen from the LAN.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide are not sure which connection type you use currently, please contact your ISP to obtain the correct information. 1. If you choose Dynamic IP, the router will automatically get IP parameters from your ISP. You can see the page as follows (Figure 3-4): Figure 3-4 WAN – Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc.
TL-WR340G/TL-WR340GD 2. 54M Wireless Router User Guide If you choose Static IP, you should have fixed IP Parameters specified by your ISP. The Static IP settings page will appear, shown in Figure 3-5: Figure 3-5 WAN - Static IP You should type the following parameters into the spaces provided: ¾ IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. ¾ Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-6 WAN - PPPoE ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time).
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Caution:Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications are visiting the Internet continually in the background. Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-8 802.1X + Dynamic IP Settings ¾ User Name - Enter the user name for 802.1X authentication provided by your ISP ¾ Password - Enter the password for 802.1X authentication provided by your ISP. Click Login to start 802.1X authentication. Click Logout to end 802.1X authentication. ¾ Host Name - This field is required to be filled by some service provider. 5. If you choose 802.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-9 802.1X + Static IP Settings ¾ ¾ User Name - Enter the user name for 802.1X authentication provided by your ISP Password - Enter the password for 802.1X authentication provided by your ISP. Click Login to start 802.1X authentication. Click Logout to end 802.1X authentication. ¾ ¾ ¾ 6. IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-10 Big Pond Settings ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Auth Server - Enter the authenticating server IP address or host name. Auth Domain - Type in the domain suffix server name based on your location. Eg, NSW / ACT - nsw.bigpond.net.au VIC / TAS / WA / SA / NT - vic.bigpond.net.au QLD - qld.bigpond.net.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide soon as you attempt to access the Internet again. To use this option, click the radio button. If you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have the Internet connecting last unless a new link is requested.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-12 PPTP Settings ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Dynamic IP/ Static IP – Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name. If you choose static IP and enter the domain name, you should also enter the DNS assigned by your ISP. And click the Save button. Click the Connect button to connect immediately.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications are visiting the Internet continually in the background. ¾ Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button. ¾ Connect Manually - You can configure the router to make it connect or disconnect manually.
TL-WR340G/TL-WR340GD 3.5 54M Wireless Router User Guide Wireless Figure 3-14 Wireless menu There are three submenus under the Wireless menu (shown in Figure 3-14): Wireless Settings, MAC Filtering and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 3.5.
TL-WR340G/TL-WR340GD ¾ 54M Wireless Router User Guide Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the router can be used. It may be illegal to use the wireless function of the router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. The default region is United States.
TL-WR340G/TL-WR340GD ¾ Security Options - You can select one of the following Securityoptions: • When you select WEP for authentication type you can select the following authentication options: • Automatic - Select Shared Key or Open System authentication type automatically based on the wireless station request. • Shared Key - Select 802.11 Shared Key authentication. Open System - Select 802.11 Open System authentication.
TL-WR340G/TL-WR340GD ¾ 54M Wireless Router User Guide Group Key Update Period - Specify the group key update interval in seconds. The value can be either 0 seconds or from 30 seconds and up, 1-29 seconds are not usable figures. Enter 0 to disable the update. Figure 3-18 WPA/WPA2 ¾ ¾ ¾ Radius Server IP - Enter the IP address of the Radius Server Radius Port - Enter the port number that the radius service used. Radius Password - Enter the password for the Radius Server.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide ¾ Privilege - Select the privileges for this entry. You may select one of the following Allow / Deny / 64-bit / 128-bit / 152-bit. ¾ Description - A simple description of the wireless station. ¾ WEP Key - Specify a unique WEP key (in Hexadecimal format) to access the router. To set up an entry, follow these instructions: First, you must decide whether the unspecified wireless stations can access the router or not.
TL-WR340G/TL-WR340GD 2. Modify the information. 3. Click the Save button. 54M Wireless Router User Guide Click the Enable All button to make all entries enabled Click the Disabled All button to make all entries disabled. Click the Delete All button to delete all entries Click the Next button to go to the next page and click the Previous button to return to the previous page. For example: If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE be able to access the router.
TL-WR340G/TL-WR340GD 3.5.3 54M Wireless Router User Guide Wireless Statistics This page shows MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-23 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer. ¾ Start IP Address - This field specifies the first of the addresses in the IP address pool. 192.168.1.100 is the default start address. ¾ End IP Address - This field specifies the last of the addresses in the IP address pool. 192.168.1.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-24 DHCP Clients List ¾ Index - The index of the DHCP Client ¾ Client Name - The name of the DHCP client ¾ MAC Address - The MAC address of the DHCP client ¾ Assigned IP - The IP address that the router has allocated to the DHCP client. ¾ Lease Time - The time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically. You cannot change any of the values on this page.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-26 Add or Modify an Address Reservation Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3. Click the Save button. Click the Enable All button to make all entries enabled Click the Disabled All button to make all entries disabled.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-28 Virtual Servers ¾ Service Port - The numbers of External Ports. You can type a service port or a range of service ports (the format is XXX – YYY, XXX is the start port, YYY is the end port). ¾ ¾ IP Address - The IP Address of the PC providing the service application. Protocol - The protocol used for this application, either TCP, UDP, or All (all protocols supported by the router).
TL-WR340G/TL-WR340GD 2. Modify the information. 3. Click the Save button. 54M Wireless Router User Guide Click the Enable All button to make all entries enabled Click the Disabled All button to make all entries disabled. Click the Delete All button to delete all entries Click the Next button to go to the next page and Click the Previous button to return the previous page.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide the PC that triggered this rule. You can input at most 5 groups of ports (or port section). Every group of ports must be set apart with ",". For example, 2000-2038, 2050-2051, 2085, 3010-3030. ¾ Incoming Protocol - The protocol used for Incoming Ports Range, either TCP or UDP, or ALL (all protocols supported by the router). ¾ Status - The status of this entry either Enabled or Disabled.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide ) Note: When the trigger connection is released, the according opening ports will be closed. Each rule allowed to be used only by one host on LAN synchronously. The trigger connection of other hosts on LAN will be refused. Incoming Port Range cannot overlap each other. 3.7.3 DMZ The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose service such as Internet gaming or videoconferencing.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide button. As allowing this may present a risk to security, this feature is disabled by default. ¾ Current UPnP Settings List - This table displays the current UPnP information. • App Description – The description provided by the application in the UPnP request • External Port - External port, which the router opened for the application. • Protocol – Shows which type of protocol is opened.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-35 Firewall Settings ¾ ¾ ¾ ¾ Enable Firewall - the general firewall switch is on or off. Enable IP Address Filtering - set IP Address Filtering is enabled or disabled. There are two default filtering rules of IP Address Filtering, either Allow or Deny passing through the router. Enable Domain Filtering - set Domain Filtering is enabled or disabled. Enable MAC Filtering - set MAC Address Filtering is enabled or disabled.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on the Firewall page, and click the Add New… button. The page "Add or Modify an IP Address Filtering entry" will appear shown in Figure 3-37: Figure 3-37 Add or Modify an IP Address Filtering Entry To create or modify an IP Address Filtering entry, please follow these instructions: 1.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Click the Delete All button to delete all entries You can change the entry’s order as desired. Fore entries are before hind entries. Enter the ID number in the first box you want to move and another ID number in second box you want to move to, and then click the Move button to change the entry’s order. Click the Next button to the next page and click the Previous button to return to the previous page.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-39 Add or Modify a Domain Filtering entry To add or modify a Domain Filtering entry, follow these instructions: 1. Effective Time - Enter a range of time in HHMM format specifying the time for the entry to take effect. For example, if you enter: 0803 - 1705, than the entry will take effect from 08:03 to 17:05. 2. Domain Name - Type the domain or key word as desired in the field. A blank in the domain field means all websites on the Internet.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-40 MAC address Filtering Before setting up MAC Filtering entries, you must ensure that Enable Firewall and Enable MAC Filtering have been selected on the Firewall page. To Add a MAC Address filtering entry, clicking the Add New… button.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Click the Enable All button to make all entries enabled. Click the Disabled All button to make all entries disabled. Click the Delete All button to delete all entries Click the Next button to go to the next page and click the Previous button to return to the previous page.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide successfully entering the password, you will be able to access the router's Web-based utility. ) Note: Be sure to change the router's default password to a very secure password. 3.8.6 Advanced Security Using Advanced Security page (shown in Figure 3-43), you can protect the router from being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood from LAN.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide ¾ TCP-SYN-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value between 5 ~ 3600 packets. When the current TCP-SYN-FLOOD Packets numbers is beyond the set value, the router will start up the blocking function immediately. ¾ Ignore Ping Packet from WAN Port - Enable or Disable ignore ping packet from WAN port. The default is disabled. If enabled, the ping packet from the Internet cannot access the router.
TL-WR340G/TL-WR340GD 3.9.1 54M Wireless Router User Guide Binding Setting This page displays the IP & MAC Binding Setting table; you can operate it in accord with your desire. (shown in Figure 3-46). Figure 3-46 IP & MAC Binding Setting ¾ MAC Address - The MAC address of the controlled computer in the LAN. ¾ IP Address - The assigned IP address of the controlled computer in the LAN. ¾ Bind - Whether or not enable the arp binding. ¾ Modify - Edit or delete item.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide To modify or delete an existing entry: 1. Find the desired entry in the table. 2. Click Modify or Delete as desired on the Modify column. To find an existing entry: 1. Click the Find button (shown in Figure 3-47). 2. Enter the MAC Address or IP Address. 3. Enter the Find button in the next page (shown in Figure 3-48). Figure 3-48 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide ¾ Status - Enabled or Disabled of the MAC address and IP address binding. ¾ Configure - Load or delete item. ¾ Load - Load the item to the IP & MAC Binding list. ¾ Delete - Delete the item. 1. Click the Bind All button to bind all the current items, available after enable. 2. Click the Load All button to load all items to the IP & MAC Binding list. 3. Click the Refresh button to refresh all items.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-51 Add or Modify a Static Route Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3. Click the Save button. Click the Enable All button to make all entries enabled. Click the Disabled All button to make all entries disabled. Click the Delete All button to delete all entries 3.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-52 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. 2. 3. 4. ¾ Type the domain names your dynamic DNS service provider gave. Type the User Name for your DDNS account. Type the Password for your DDNS account. Click the Login button to login to the DDNS service. Connection Status -The status of the DDNS service connection is displayed here. Click Logout to logout of the DDNS service. 3.11.2 Oray.
TL-WR340G/TL-WR340GD 2. 3. 54M Wireless Router User Guide Type the Password for your DDNS account. Click the Login button to login the DDNS service. ¾ Connection Status - The status of the DDNS service connection is displayed here. ¾ Domain Name - The domain names are displayed here. Click Logout to logout the DDNS service. 3.11.3 Comexe.cn DDNS If your selected dynamic DNS Service Provider is www.comexe.cn, the page will appear as shown in Figure 3-54: Figure 3-54 Comexe.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide 3.12 System Tools Figure 3-55 The System Tools menu There are eight submenus under the System Tools menu (shown in Figure 3-55): Time, Firmware, Factory Defaults, Backup and Restore, Reboot, Password, Log and Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 3.12.
TL-WR340G/TL-WR340GD 3. 54M Wireless Router User Guide Click Save. Click the Get GMT button to get GMT time from Internet if you have connected to Internet. If you’re using Daylight saving time, please follow the steps below. 1. Select using daylight saving time. 2. Enter daylight saving beginning time and end time in the right blanks. 3. Click Save. ) Note: This setting will be used for some time-based functions such as firewall.
TL-WR340G/TL-WR340GD ¾ 54M Wireless Router User Guide Hardware Version - Displays the current hardware version. The hardware version of the upgrade file must accord with the current hardware version. ) Note: Do not turn off the router or press the Reset button while the firmware is being upgraded. The router will reboot after the Upgrading has been finished. 3.12.3 Factory Defaults This page (shown in Figure 3-58) allows you to restore the factory default settings for the router.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide ) Note: The current configuration will be covered with the uploading configuration file. The restoration process lasts for 20 seconds and the router will restart automatically. Keep the router on during the restoring process, to prevent any damage. 3.12.5 Reboot This page (shown in Figure 3-60) allows you to reboot the router. Figure 3-60 Reboot the router Click the Reboot button to reboot the router.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide It is recommended strongly that you change the factory default user name and password of the router. All users who try to access the router's Web-based utility or Quick Setup will be prompted ) Note: The new user name and password must not exceed 14 characters in length and must not include any spaces. Enter the new Password twice to confirm it. Click the Save button when finished. Click the Clear All button to clear all. 3.12.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Figure 3-63 Statistics ¾ Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click the Enable button. If disabled, the function of DoS protection in Security settings will be ineffective. ¾ Packets Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval indicates the time section of the packets statistic.
TL-WR340G/TL-WR340GD Appendix A: 54M Wireless Router User Guide Glossary Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network. Also used to expand the range of a wireless network. Ad-hoc Network - An ad-hoc network is a group of computers, each with a wireless adapter, connected as an independent IEEE 802.11 wireless LAN.
TL-WR340G/TL-WR340GD Appendix B: 54M Wireless Router User Guide Specifications General Standards and Protocols IEEE 802.3,IEEE 802.3u, IEEE 802.11b and IEEE 802.11g TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Safety & Emission FCC、CE Power Supply 9V~ 0.8A LEDs Ports Power, SYS, WLAN, WAN, 1-4 One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX Wireless Modulation IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK IEEE 802.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide Appendix C: FAQ 1. How do I configure the router to access Internet by ADSL users? 1) 2) 3) First, configure the ADSL Modem configured in RFC1483 bridge model. Connect the Ethernet cable from your ADSL Modem to the WAN port on the router. The telephone cord plugs into the Line port of the ADSL Modem. Login to the router, click the “Network” menu on the left of your browser, and click "WAN" submenu.
TL-WR340G/TL-WR340GD 54M Wireless Router User Guide register, login to the router and click the "Network" menu link on the left of your browser, and then click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC’s MAC address is proper MAC address, click the "Clone MAC Address" button and your PC’s MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address into the "WAN MAC Address" field. The format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click the "Save" button.
TL-WR340G/TL-WR340GD 5. 54M Wireless Router User Guide I want to build a WEB Server on the LAN, what should I do? Because the WEB Server port 80 will interfere with the WEB management port 80 on the router, you must change the WEB management port number to avoid interference. To change the WEB management port number: Login to the router, click the “Security” menu on the left of your browser, and click "Remote Management" submenu.
TL-WR340G/TL-WR340GD Appendix D: 54M Wireless Router User Guide Contact Information For help with the installation or operation of TP-LINK Product, please visit our website. http://www.tp-link.
