TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Rev: 1.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2013 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device.
ᅝܼ䃂䀶ঞ⊼ᛣџ䷙ ƽ䂟Փ⫼ॳ㺱䳏⑤կឝ఼া㛑ᣝ✻ᴀ⫶ક⊼ᯢⱘ䳏⑤串ൟՓ⫼ᴀ⫶કDŽ ƽ⏙┨ᴀ⫶કПࠡ䂟ܜᢨᥝ䳏⑤㎮DŽ䂟࣓Փ⫼⎆储ǃై䳻⏙┨ࡥ▩Ꮧ䘆㸠⏙┨DŽ ƽ⊼ᛣ䰆╂ˈ䂟࣓ᇛ∈݊Ҫ⎆储┥☥ࠄᴀ⫶કϞDŽ ǂ ƽᦦῑ㟛䭟ষկ䗮乼Փ⫼ˈҹ⺎ֱᴀ⫶કⱘ᪡ৃ䴴Ϻ䰆ℶ䘢➅ˈ䂟࣓ฉา㽚㪟䭟ষDŽ ƽ䂟࣓ᇛᴀ⫶ક㕂ᬒᮐ䴴䖥➅⑤ⱘഄᮍDŽ䰸䴲᳝ℷᐌⱘ䗮乼ˈ৺ࠛϡৃᬒᆚ䭝ԡ㕂ЁDŽ ƽ䂟ϡ㽕⾕㞾ᠧ䭟″←ˈϡ㽕௫䀺㞾㸠㎁ׂᴀ⫶કˈ䂟⬅ᥜ⃞ⱘᇜὁҎ䘆㸠ℸ䷙ᎹDŽ Safety Information z When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N Mini Pocket Router - Advanced Edition Model No.
CONTENTS Package Contents..................................................................................................................................1 Chapter 1. Introduction.......................................................................................................................2 1.1 Overview of the Router .......................................................................................................2 1.2 Conventions ............................................................
4.6.3 4.7 4.8 4.9 LAN...................................................................................................................... 45 Wireless ........................................................................................................................... 46 4.7.1 Wireless Settings................................................................................................. 46 4.7.2 Wireless Security...............................................................................
4.14 Advanced Routing............................................................................................................ 85 4.14.1 Static Routing List................................................................................................ 85 4.14.2 System Routing Table.......................................................................................... 86 4.15 Bandwidth Control............................................................................................................
5.8 5.9 5.7.1 Wireless Settings................................................................................................112 5.7.2 Wireless Security................................................................................................113 5.7.3 Wireless MAC Filtering .......................................................................................116 5.7.4 Wireless Advanced .............................................................................................118 5.7.
6.7 6.8 6.9 6.6.4 Wireless Advanced ............................................................................................ 146 6.6.5 Wireless Statistics.............................................................................................. 147 DHCP ............................................................................................................................. 148 6.7.1 DHCP Settings.............................................................................................
7.8 7.9 USB Settings.................................................................................................................. 175 7.8.1 Storage Sharing................................................................................................. 175 7.8.2 Media Server ..................................................................................................... 177 7.8.3 User Accounts...................................................................................................
8.9 8.8.1 Storage Sharing................................................................................................. 215 8.8.2 Media Server ..................................................................................................... 217 8.8.3 User Accounts.................................................................................................... 219 Forwarding .....................................................................................................................
8.16.3 Dyndns org DDNS ............................................................................................. 250 8.17 System Tools.................................................................................................................. 251 8.17.1 Time Settings..................................................................................................... 252 8.17.2 Diagnostic ..........................................................................................................
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Package Contents The following items should be found in your package: ¾ One TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ¾ Quick Installation Guide ¾ One RJ-45 Ethernet Cable ¾ One Resource CD for TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition, including: x User Guide x Other Helpful Information ) Note: Make sure that the package contains the above items.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Chapter 1. Introduction 1.1 Overview of the Router Small enough to fit in the average pocket, the TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition is uniquely suited to provide robust wireless networking to travelers, students, or anyone else for work or play. Incredible Speed TL-WR710N supports the newest 802.11n standards, and provides backward compatibility with older 802.11b/g standards as well.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition this user guide. Before installing the Router, please look through this guide to know all the Router’s functions. 1.2 Conventions The Router or TL-WR710N mentioned in this guide stands for TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition without any explanation. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition LED Status Solid Blue Indication The device is working properly. Condition 1: System is booting. Blinking Condition 2: The Ethernet Cable or USB Device is connecting to the product. Table 1-1 The LED Description ¾ USB: The USB port connects to a USB storage device. ¾ Reset˖It is used to reset the Router to its factory defaults.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Chapter 2. Connecting the Router 2.1 System Requirements ¾ Each PC in the LAN needs a working Ethernet Adapter ¾ TCP/IP protocol must be installed on each PC ¾ Web browser, such as Microsoft Internet Explorer 5.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 2.3.1 Wireless Router Mode As a wireless router, TL-WR710N enables multi-user to share Internet via DSL/Cable Modem. The default mode of TL-WR710N is Wireless Router. On this mode, the wired port LAN/WAN works as WAN, it can be connected to DSL Modem or directly connected to a wired network with an Ethernet cable. Computers could connect to the device by both wired way through the wired port LAN and wireless way.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 2-2 Hardware Installation of the TL-WR710N in AP Mode 1. Connect the LAN or LAN/WAN port of TL-WR710N to the wired network port with an Ethernet cable. 2. Plug the power plug of TL-WR710N in electrical wall socket. 3. Power on the PC(s) and notebook(s). 2.3.3 Repeater Mode TL-WR710N is used to extend the range of wireless signal of the existing AP or wireless router. On this mode, the wired port LAN/WAN works as LAN.
TL-WR710N 2. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Power on the notebook(s). ) Note: It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet cable, and then login the Router from the PC/notebook to set the Router in Repeater mode. 2.3.4 Client Mode TL-WR710N is used as a wireless network card to connect the wireless network signal or wireless router. On this mode, the wired port LAN/WAN works as LAN.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 2-5 Hardware Installation of the TL-WR710N in WISP Client Router Mode 1. Plug the power plug of TL-WR710N in electrical wall socket. 2. Power on the notebook(s).
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address of the TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition is 192.168.0.254. And the default Subnet Mask is 255.255.255.0.
TL-WR710N 2) 150Mbps Wireless N Mini Pocket Router - Advanced Edition Enter the Security key. Click OK. 3) If you can see Connected after the default SSID, you’ve successfully connected to the wireless network. ) Note: 1. 2. The default SSID and Password of your Router are on the label. Both are case-sensitive. The pre-encryption function is enabled by default and the default Network key/Security key is the Password on the label.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 3-1 Success result of Ping command ¾ If the result displayed is similar to the Figure 3-2, it means the connection between your PC and the Router has failed. Figure 3-2 Failure result of Ping command Please check the connection following these steps: 1. Is the connection between your PC and the Router correct? ) Note: The LED of LAN/WAN ports which you link to on the Router should be lit. 2.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. 1. To access the configuration utility, open a web-browser and type in the default address http://tplinklogin.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 3-5 Quick Setup - Working Mode ) Note: The Router supports five working modes for multi-user to access the Internet: Wireless Router, Access Point, Repeater, Client and WISP Client Router. In Wireless Router mode, the device enables multiple users to share the Internet connection via ADSL/Cable Modem.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition The Router supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the Internet. To make sure the connection type your ISP provides, please refer to the ISP. Make sure the cable is securely plugged into the WAN port before detection.
TL-WR710N 2. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Then, the Wireless page will appear as shown in Figure 3-9. Set the wireless parameters. It is recommended that you rename an SSID, choose a Security Type and enter a Password. Then click Next. Figure 3-9 Quick Setup - Wireless ¾ Wireless Radio - Enable or disable the wireless radio choosing from the pull-down list. ¾ Wireless Network Name - Enter a string of up to 32 characters.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition When 11bg mixed mode is selected, only 11bg mixed wireless stations can connect to the Router. It is strongly recommended that you set the Mode to 11bgn mixed, and all of 802.11b/g/n wireless stations can connect to the Router. Note: If 11bg mixed mode is selected in the Mode field, the Channel Width selecting field will turn grey and the value will become 20M, which is unable to be changed.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 3-11 Quick Setup - Wireless ¾ Wireless Network Name - Enter a string of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC address). But it is recommended strongly that you change your networks name (SSID) to a different value.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ) Note: If 11bg mixed mode is selected in the Mode field, the Channel Width selecting field will turn grey and the value will become 20M, which is unable to be changed. ¾ Channel Width - Select any channel width from the pull-down list. The default setting is automatic, which can automatically adjust the channel width for your clients.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 3-14 Quick Setup - Wireless ¾ Repeater Mode - In Repeater mode, the wireless repeater relays signal between its stations and the root AP for greater wireless range. x Universal Repeater - In Repeater mode, the AP with WDS disabled will relay data to an associated root AP. AP function is enabled meanwhile. x WDS Repeater - In WDS Repeater mode, the AP with WDS enabled will relay data to an associated root AP.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Wireless Password - If the AP your router is going to connect need password, you need to fill the password in this blank. 2. Click Survey button on the Wireless page as shown in Figure 3-14, and then AP List page will appear as shown in Figure 3-15. Find the SSID of the Access Point you want to access, and click Connect in the corresponding row. For example, the third item is selected.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 3-17 Quick Setup - Wireless ¾ Wireless Name of Root AP - Enter the SSID that you want to access. ¾ MAC Address of Root AP - Enter the MAC address of AP that you want to access. ¾ Survey - Click this button, you can survey the AP which runs in the environment. ¾ Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 3-18 AP List 3. Click the Next button in Figure 3-19. You will then see the Finish page. Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup. Figure 3-19 Quick Setup - Finish 3.2.5 WISP Client Router Mode When you choose WISP Client Router Mode on Working Mode page in Figure 3-5 , take the following steps: 1.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition PPPoE - For this connection, you will need your account name and password from your ISP. If you have applied ADSL to realize Dial-up service, you should choose this type. Under this condition, you should fill in both the User Name and Password that the ISP supplied. Please note that these fields are case-sensitive.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 3-23 Quick Setup - Static IP ¾ SSID - The SSID of the AP your router is going to connect to as a client. You can also use the search function to select the SSID to join. ¾ BSSID - The BSSID of the AP your router is going to connect to as a client. You can also use the search function to select the BSSID to join. ¾ Survey - Click this button, you can survey the AP which runs in the current channel.
TL-WR710N ¾ ¾ 3. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Wireless Security Mode - You can configure the security settings of your wireless network. Wireless Password - Input the password of your Local SSID. Click Survey button on the Wireless page as shown in Figure 3-20, and then AP List page will appear as shown in Figure 3-24. Find the SSID of the Access Point you want to access, and click Connect in the corresponding row. For example, the third item is selected.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Chapter 4. Configuration for Wireless Router Mode This chapter will show each Web page's key functions and the configuration way for Wireless Router Mode of TL-WR710N. 4.1 Login After your successful login, you can configure and manage the device. There are main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-2 ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ LAN - This field displays the current settings or information for the LAN, you can configure them in the Network > LAN page. x MAC Address - The physical address of the Router, as seen from the LAN. x IP Address - The LAN IP address of the Router.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Wireless - This field displays basic information or status for wireless function, you can configure them in the Wireless > Wireless Settings page. x Working Mode - The current wireless working mode in use. x Wireless Radio - Indicates whether the wireless radio feature of the AP is enabled or disabled. x Name (SSID) - The SSID of the AP. x Mode - The current wireless mode which the Router works on.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4.3 Quick Setup Please refer to Section 3.2: "Quick Installation Guide." 4.4 WPS WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This section will guide you to add a new wireless device to an existing network quickly by function. The WPS function is only available when the Operation Mode is set to Access Point. Select menu “WPS”, you will see the next screen shown in Figure 4-3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ) Note: To build a successful connection by WPS, you should also do the corresponding configuration of the new device for WPS function meanwhile. For the configuration of the new device, here takes the Wireless Adapter of our company for example. I. By PBC If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC) method, you can add it to the network by PBC with the following two methods.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Step 4: Wait for a while until the next screen appears. Click OK to complete the WPS configuration. The WPS Configuration Screen of Wireless Adapter Method Two: Enter the PIN into my AP Step 1: For the configuration of the wireless adapter, please choose “Enter the PIN of this device into my access point or wireless router” in the configuration utility of the WPS as below, and click Connect.
TL-WR710N Step 3: 150Mbps Wireless N Mini Pocket Router - Advanced Edition Choose “Enter the new device's PIN” and enter the PIN code ˄take 16952898 for example˅ of the wireless adapter in the field after PIN as shown in the figure below. Then click Connect. Figure 4-5 Add A New Device Method Three: Enter the PIN from my AP Step 1: Get the Current PIN code of the AP in Figure 4-3 (each AP has its unique PIN code. Here takes the PIN code 12345670 of this AP for example).
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition You will see the following screen when the new device has successfully connected to the network. Figure 4-6 ) Note: 1) The WPS LED on the AP will light green for five minutes if the device has been successfully added to the network. 2) The WPS function cannot be configured if the Wireless function of the AP is disabled. Please make sure the Wireless function is enabled before configuring the WPS. 4.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 4.6 Network Figure 4-8 the Network menu There are three submenus under the Network menu (shown in Figure 4-8): WAN, MAC Clone and LAN. Click any of them, and you will be able to configure the corresponding function. 4.6.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Use These DNS Servers - If your ISP gives you one or two DNS addresses, select Use These DNS Servers and enter the primary and secondary addresses into the correct fields. Otherwise, the DNS servers will be assigned dynamically from your ISP.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal notation provided by your ISP. Click the Save button to save your settings. 3. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x Dynamic IP - You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP. x Static IP - You can check this radio button to use Static IP as the secondary connection to connect to the local area network provided by ISP.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-12 PPPoE Advanced Settings ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Service Name/AC Name - The service name and AC (Access Concentrator) name should not be configured unless you are sure it is necessary for your ISP. In most cases, leaving these fields blank will work.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-13 WAN – BigPond Cable ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Auth Server - Enter the authenticating server IP address or host name. ¾ Auth Domain - Type in the domain suffix server name based on your location, ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition after a specified inactivity period and re-established when you attempt to access the Internet again. Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately. Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle Time because some applications are visiting the Internet continually in the background. Click the Save button to save your settings. 5.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Connect on Demand - You can configure the Router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, check the radio button.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-15 WAN – PPTP/Russia PPTP ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name. If you choose static IP and enter the domain name, you should also enter the DNS assigned by your ISP. And click the Save button.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the Router is disconnected. To use this option, check the radio button. ¾ Connect Manually - You can configure the Router to make it connect or disconnect manually.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Save button to save your settings. ) Note: 1. Only the PC on your LAN can use the MAC Address Clone function. 2. If you change WAN MAC Address when the WAN connection is PPPoE, it will not take effect until the connection is re-established. 4.6.3 LAN Choose menu “Network ė LAN”, and then you can configure the IP parameters of the LAN on the screen as below.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4.7 Wireless Figure 4-18 Wireless menu There are five submenus under the Wireless menu (shown in Figure 4-18): Wireless Settings, Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function. 4.7.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance. ¾ Mode - Select the desired mode. The default setting is 11bgn mixed. x 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. x 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition BSSID (to be bridged) - The BSSID of the AP your Router is going to connect to as a client. You can also use the search function to select the BSSID to join. ¾ Survey - Click this button, you can survey the AP which runs in the current channel. ¾ Security Options - This option should be chosen according to the AP's security configuration. It is recommended that the security type is the same as your AP's security type.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-21 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly recommended to choose one of the following modes to enable security. ¾ WPA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared passphrase.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-22 ¾ WPA /WPA2-Enterprise - It’s based on Radius Server. x Version - you can choose the version of the WPA security from the pull-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. x Encryption - You can select Automatic, TKIP or AES. x Radius Server IP - Enter the IP address of the Radius server.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type. Be sure to click the Save button to save your settings on this page. 4.7.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-0B. 2. Give a simple description for the wireless station in the Description field. For example: Wireless station A. 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-25 Filtering Rules 4.7.4 Wireless Advanced Choose menu “Wireless ė Wireless Advanced”, and then you can configure the advanced settings of your wireless network. Figure 4-26 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. You can select High, Middle or Low which you would like. High is the default setting and is recommended.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition broadcast and multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval. ¾ Enable WMM - WMM function can guarantee the packets with high-priority messages being transmitted preferentially.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button. If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. ) Note: This page will be refreshed automatically every 5 seconds. 4.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end address.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Refresh button. 4.8.3 Address Reservation Choose menu “DHCP ė Address Reservation”, and then you can view and add a reserved address for clients via the next screen (shown in Figure 4-31).
TL-WR710N 1. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3. Click the Save button. Click the Enable/Disable All button to make all entries enabled/disabled. Click the Delete All button to delete all entries. Click the Next button to go to the next page and Click the Previous button to return the previous page. 4.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Volume - The volume name of the USB drive the users have access to. Volume 1-8 is mapping to USB port1, and Volume 9-16 is mapping to USB port2. ¾ Capacity - The storage capacity of the USB driver. ¾ Used - The used space of the USB driver. ¾ Free - The available space of the USB driver. ¾ Use% - The percentage of the used space. ¾ Shared - Indicates the shared or non-shared status of the volume.
TL-WR710N 3. 150Mbps Wireless N Mini Pocket Router - Advanced Edition To unplug the USB drive, click Eject Disk button first. Simply pulling USB drive out of the USB port can cause damage to the device and loss of data. 4. Mounted volumes of each USB port are subject to the 8-volume limit. So you cannot access more than 8 volumes on the USB storage device. 5.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 2. Click the Start button to start the media server, and then the screen will appear as shown in Figure 4-38. Figure 4-38 Media Server Setting 3. Click the Add share folder button to specify a folder as the search path of media server. The screen will then appear as shown in Figure 4-39. Figure 4-39 Add New Folder ¾ Display Name - You can enter a display name for the share folder.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Back - Click this button to discard the settings and just go to the media server configuration page. 4. Click the Scan All button to scan all the share folders immediately. You can also select the Auto-scan, at same time, select an auto scan interval time by drop-down list. In this case, the media server will auto scan the share folders. ) Note: The max share folders number is 6.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-41 Add or Modify User Account ¾ User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not exceeding 15 characters in length. ¾ Password - Enter the password in the Password field. The password must be composed of alphanumeric symbols not exceeding 15 characters in length. For security purposes, the password for each user account is not displayed.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition There are four submenus under the Forwarding menu (shown in Figure 4-42): Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function. 4.10.1 Virtual Servers Choose menu “Forwarding ė Virtual Servers”, and then you can view and add virtual servers in the screen as shown in Figure 4-43.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4. Select the protocol used for this application, either TCP, UDP, or All. 5. Select the Enabled to enable the virtual server. 6. Click the Save button. Figure 4-44 Add or Modify a Virtual Server Entry ) Note: If your computer or server has more than one type of available service, please select another service, and enter the same IP Address for that computer or server. To modify or delete an existing entry: 1.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition with a pure NAT Router. Port Triggering is used for some of these applications that can work with an NAT Router. Figure 4-45 Port Triggering Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection using a destination port number defined in the Trigger Port field. 2.
TL-WR710N 4. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP, or All. 5. Select Enabled in Status field. 6. Click the Save button to save the new rule. Figure 4-46 Add or Modify a Port Triggering Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-47 DMZ To assign a computer or server to be a DMZ server: 1. Check the Enable radio button. 2. Enter the IP Address of a local host in the DMZ Host IP Address field. 3. Click the Save button. ) Note: After you set the DMZ host, the firewall related to the host will not work. 4.10.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x Status - The status of the port is displayed here. “Enabled” means that the port is still active. Otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. 4.11Security Figure 4-49 The Security menu There are four submenus under the Security menu as shown in Figure 4-49: Basic Security, Advanced Security, Local Management and Remote Management.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition traffic passing through the session conforms to the protocol. SPI Firewall is enabled by factory default. If you want all the computers on the LAN exposed to the outside world, you can disable it. ¾ VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP, or L2TP protocols to pass through the Router’s firewall.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-51 ¾ Advanced Security Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets statistics. The result of the statistics is used for analysis by SYN Flood, UDP Flood and ICMP-Flood. ¾ DoS Protection - Denial of Service protection.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set value, the Router will startup the blocking function immediately. ¾ Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping Packet From WAN Port.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition use the password to browse the built-in web pages to perform Administrator tasks while all the others will be blocked. After click the Add button, your PC's MAC Address will be placed in the list above. Click the Save button to save your settings. ) Note: If your PC is blocked but you want to access the Router again, press and hold the WPS button for more than 5 seconds to reset the Router to factory defaults. 4.11.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4.12 Parental Control Choose menu “Parental Control”, and you can configure the parental control in the screen as shown in Figure 4-54. The Parental Control function can be used to control the internet activities of the child, limit the child to access certain websites and restrict the time of surfing.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4. Enter the allowed domain name of the website, either the full name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywords in it (e.g.www.google.com) will be allowed. 5. Select from the Effective Time drop-down list the schedule (e.g. Schedule_1) you want the entry to take effect.
TL-WR710N 2. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click “Access Restriction ĺ Schedule” on the left to enter the Schedule Settings page. Click Add New... button to create a new schedule with Schedule Description is Schedule_1, Day is Sat and Time is all day-24 hours. 3. 4. Click “Parental Control” menu on the left to go back to the Add or Modify Parental Control Entry page: z Click Add New... button. z Enter 00-11-22-33-44-AA in the MAC Address of Child PC field.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-58 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box to enable the Internet Access Restriction function, so the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of the rule and this name is unique. ¾ Host - Here displays the host selected in the corresponding rule. ¾ Target - Here displays the target selected in the corresponding rule.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 6. In the Action field, select Deny or Allow. 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list. Click the Delete All button to delete all the entries in the table. You can change the entry’s order as desired. Fore entries are before hind entries.
TL-WR710N z 150Mbps Wireless N Mini Pocket Router - Advanced Edition In Rule Name field, create a name for the rule. Note that this name should be unique, for example Rule_1. z In Host field, select Host_1. z In Target field, select Target_1. z In Schedule field, select Schedule_1. z In Action field, select Allow. z In Status field, select Enabled. z Click Save to complete the settings. Then you will go back to the Access Restriction Rule Management page and see the following list.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 2) In LAN IP Address field, enter the IP address. z If you select MAC Address, the screen shown is Figure 4-63. 1) In Host Description field, create a unique description for the host (e.g. Host_1). 2) In MAC Address field, enter the MAC address. 3. Click the Save button to complete the settings. Click the Delete All button to delete all the entries in the table.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-64 Host Settings 4.13.3 Target Choose menu “Access Control ė Target”, you can view and set a Target list in the screen as shown in Figure 4-65. The target list is necessary for the Access Restriction Rule. Figure 4-65 Target Settings ¾ Target Description - Here displays the description about the target and this description is unique. ¾ Information - The target can be IP address, port, or domain name.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 2) In Domain Name field, enter the domain name, either the full name or the keywords (for example Google) in the blank. Any domain name with keywords in it (e.g.www.google.com) will be blocked or allowed. You can enter 4 domain names. 3. Click the Save button. Click the Delete All button to delete all the entries in the table. Click the Next button to go to the next page, or click the Previous button return to the previous page.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Then you will go back to the Target Settings page and see the following list, Figure 4-68 Target Settings 4.13.4 Schedule Choose menu “Access Control ė Schedule”, you can view and set a Schedule list in the next screen as shown in Figure 4-69. The Schedule list is necessary for the Access Restriction Rule.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-70 Advanced Schedule Settings For example: If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday, you should first follow the settings below: 1. Click Add New...
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4.14 Advanced Routing Figure 4-72 The Advanced Routing Menu There are two submenus under the Network menu (shown in Figure 4-72): Static Routing List and System Routing Table. Click any of them, and you will be able to configure the corresponding function. 4.14.1 Static Routing List Choose menu “Static Routing”, and you can configure the static route in the next screen, shown in Figure 4-73.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion. ¾ Default Gateway - This is the IP Address of the gateway device that allows for contact between the Router and the network or host. 3. Select Enabled or Disabled for this entry on the Status drop-down list. 4. Click the Save button to make the entry take effect.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4.15Bandwidth Control Figure 4-76 The Bandwidth Control menu There are two submenus under the Bandwidth Control menu as shown in Figure 4-76. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.15.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-78 Bandwidth Control Rule List ¾ Description - This is the information about the rules such as address range. ¾ Egress Bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0. ¾ Ingress Bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0. ¾ Enable - This displays the status of the rule.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ¾ Egress Bandwidth - The max and the min upload speed which through the WAN port, default number is 0. ¾ Ingress Bandwidth - The max and the min download speed through the WAN port, default number is 0. Step 3: Click the Save button. 4.16 IP & MAC Binding Figure 4-80 The IP & MAC Binding menu There are two submenus under the IP & MAC Binding menu: Binding Setting and ARP List.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition When you want to add or modify an IP & MAC Binding entry, you can click the Add New button or Modify button, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding entry. Figure 4-82 IP & MAC Binding Setting (Add & Modify) To add IP & MAC Binding entries: 1. Click the Add New.. button. 2. Enter the MAC Address and IP Address. 3. Select the Bind checkbox. 4.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 4.16.2 ARP List To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could configure the items on the ARP list also. This page displays the ARP List; it shows all the existing IP & MAC Binding entries.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition dynamic IP address, and then your friends can connect to your server by entering your domain name no matter what your IP address is. Before using this feature, you need to sign up for DDNS service providers such as www.no-ip.com, www.comexe.cn, or www.dyndns.org. The Dynamic DNS client service provider will give you a password or key. 4.17.1 No-IP DDNS If the dynamic DNS Service Provider you select is www.no-ip.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-86 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. Type the Domain Name received from your dynamic DNS service provider. 2. Type the User Name for your DDNS account. 3. Type the Password for your DDNS account. 4. Click the Login button to log in to the DDNS service. Connection Status -The status of the DDNS service connection is displayed here. Click Logout to log out of the DDNS service. 4.17.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-87 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Type the User Name for your DDNS account. 2. Type the Password for your DDNS account. 3. Type the Domain Name you received from dynamic DNS service provider here. 4. Click the Login button to log in to the DDNS service. Connection Status -The status of the DDNS service connection is displayed here. Click Logout to logout of the DDNS service. 4.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.18.1 Time Settings You can set time manually or get GMT from the Internet for the router on this page: Figure 4-89 Time Settings ¾ ¾ ¾ Time Zone - Select your local time zone from this pull-down list. Date - Enter your local date in MM/DD/YY into the right blanks.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition The router will obtain GMT automatically from Internet if it has already connected to Internet. 4.18.2 Diagnostic Choose menu “System Tools ė Diagnostic”, you can transact Ping or Traceroute function to check connectivity of your network in the following screen. Figure 4-90 ¾ Diagnostic Tools Diagnostic Tool - Check the radio button to select one diagnostic too.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no reply in the specified time, the connection is overtime. ¾ Traceroute Max TTL - The max number of hops for a Traceroute connection. Click Start to check the connectivity of the Internet. The Diagnostic Results page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of the Internet is fine.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ) Note: 1. When you upgrade the router's firmware, you will lose current configuration settings, so make sure you backup the router’s settings before you upgrade its firmware. 2. Make sure that your computer is connected to the Internet through the cable when you upgrade the firmware. To upgrade through wireless connection is not allowed. 3. Set your IP address as static IP before upgrading.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4.18.5 Backup & Restore This page allows you to save current configuration of router as backup or restore the configuration file you saved before. Figure 4-94 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To restore the router's configuration, follow these instructions: x Click the Browse button to select the backup file which you want to restore.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ¾ Web Service Port of the router. ¾ Upgrade the firmware of the router (system will reboot automatically). ¾ Restore the router's settings to factory default (system will reboot automatically). 4.18.7 Password This page allows you to change the factory default user name and password of the router. Figure 4-96 Password It is recommended strongly that you change the factory default user name and password of the router.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-97 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of current logs manually according to the address and validation information set in Mail Settings. The result will be shown in the later log soon. ¾ Clear Log - All the logs will be deleted from this device permanently, not just from the page. 4.18.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 4-98 Statistics ¾ Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click the Enable button. If disabled, the function of DoS protection in Security settings will be ineffective. ¾ Packets Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval indicates the time section of the packets statistic.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Chapter 5. Configuration for Access Point Mode This chapter will show each Web page's key functions and the configuration way for Access Point Mode of TL-WR710N. 5.1 Login After your successful login, you can configure and manage the device. There are main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus. On the right, there are the corresponding explanations and instructions.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 5-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ Wired - This field displays the current settings or information for the LAN, you can configure them in the Network > LAN page. x MAC address - The physical address of the Router, as seen from the LAN. x IP address - The LAN IP address of the Router.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x Channel Width - The current wireless channel width in use. x MAC Address - The physical address of the Router, as seen from the WLAN. ¾ Traffic Statistics - The Router’s traffic statistics. x Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port. x Received (Packets) - Traffic that counted in packets has been received out from the WAN port.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Disable PIN of this Device - WPS external registrar of entering the device’s PIN can be disabled or enabled manually. If the device receives multiple failed attempts to authenticate an external Registrar, this function will be disabled automatically. ¾ Add Device - You can add a new device to the existing network manually by clicking this button.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition The WPS Configuration Screen of Wireless Adapter Step 4: Wait for a while until the next screen appears. Click OK to complete the WPS configuration.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition The WPS Configuration Screen of Wireless Adapter ) Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Step 2: Keep the WPS Status as Enabled and click the Add Device button in Figure 5-3. Step 3: Choose “Enter the new device's PIN” and enter the PIN code ˄take 16952898 for example˅ of the wireless adapter in the field after PIN as shown in the figure below. Then click Connect.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Step 2: For the configuration of the wireless adapter, please choose “Enter the PIN of my access point or wireless router” in the configuration utility of the WPS as below, and enter the PIN code of the AP into the field after “Access Point PIN”. Then click Connect. The WPS Configuration Screen of Wireless Adapter ) Note: The default PIN code of the AP can be found in its label or the WPS configuration screen as Figure 5-3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 5.5 Working Mode The Router supports five operation mode types: Wireless Router, Access Point, Repeater, Client and Wireless Client Router. Please select one you want. Click Save to save your choice, which is shown as Figure 5-7. Figure 5-7 Wireless Working Mode Settings ¾ Wireless Router - The wireless Router Mode. In this mode, the device enables multi-user to share Internet via DSL/Cable Modem. The only wired port works as WAN.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 5-9 LAN ¾ MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can not be changed. ¾ Type - Choosing Smart IP (DHCP) to get IP address from DHCP server, or choosing static IP to config IP address manually. ¾ IP Address - Enter the IP address of your system in dotted-decimal notation (factory default 192.168.0.254). ¾ Subnet Mask - An address code that determines the size of the network.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition There are five submenus under the Wireless menu (shown in Figure 5-10): Wireless Settings, Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function. 5.7.1 Wireless Settings Choose menu “Wireless ė Wireless Settings”, and then you can configure the basic settings for the wireless network on this page.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition When 11bg mixed mode is selected, only 11bg mixed wireless stations can connect to the Router. It is strongly recommended that you set the Mode to 11bgn mixed, and all of 802.11b/g/n wireless stations can connect to the Router. ) Note: If 11bg mixed mode is selected in the Mode field, the Channel Width selecting field will turn grey and the value will become 20M, which is unable to be changed.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 5-12 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly recommended to choose one of the following modes to enable security. ¾ WPA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared passphrase.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 5-13 ¾ WPA /WPA2-Enterprise - It’s based on Radius Server. x Version - you can choose the version of the WPA security from the pull-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. x Encryption - You can select Automatic, TKIP or AES. x Radius Server IP - Enter the IP address of the Radius server.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type. 5.7.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-0B. 2. Give a simple description for the wireless station in the Description field. For example: Wireless station A. 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 5.7.4 Wireless Advanced Choose menu “Wireless ė Wireless Advanced”, and then you can configure the advanced settings of your wireless network. Figure 5-16 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. You can select High, Middle or Low which you would like. High is the default setting and is recommended. ¾ Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval. ¾ Enable WMM - WMM function can guarantee the packets with high-priority messages being transmitted preferentially. It is strongly recommended enabled.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. ) Note: This page will be refreshed automatically every 5 seconds. 5.8 DHCP Figure 5-18 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 5-18), DHCP Settings, DHCP Client List and Address Reservation.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end address.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 5-21 DHCP Client List ¾ Client Name - The name of the DHCP client ¾ MAC Address - The MAC address of the DHCP client ¾ Assigned IP - The IP address that the Router has allocated to the DHCP client ¾ Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired, a new dynamic IP address will be automatically assigned to the user. You cannot change any of the values on this page.
TL-WR710N 2. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal notation) of the computer for which you want to reserve an IP address. 3. Click the Save button. Figure 5-23 Add or Modify an Address Reservation Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 5-25 Storage Sharing ¾ Service Status - Indicates the Network Sharing service's current status. You can click the Start button to start the Storage Sharing service and click the Stop button to stop it. ¾ Volume - The volume name of the USB drive the users have access to. Volume 1-8 is mapping to USB port1, and Volume 9-16 is mapping to USB port2. ¾ Capacity - The storage capacity of the USB driver.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Rescan button to start a new scan. Follow the instructions below to set up your router as a file server: 1. Plug an external USB hard disk drive or USB flash drive into this router. 2. Click the Rescan button to find the USB drive that has been attached to the router. 3. Click the Start button to start the Storage Sharing service. 4. Click the Enable button under Shared to enable the disk to share. 5.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Delete - You can delete the share folder by click Delete. To set up your media server, please follow the instructions below: 1. Plug an external USB hard disk drive or USB flash drive into this router, and then the screen will appear as shown in Figure 5-28. Figure 5-28 Media Server Setting 2. Click the Start button to start the media server, and then the screen will appear as shown in Figure 5-29. Figure 5-29 Media Server Setting 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 5-30 Add New Folder ¾ Display Name - You can enter a display name for the share folder. ¾ Share entire partition - Choose this option and then the folders contained in this partition will all be shared. ¾ Folder Location- Displays the location of this folder. ¾ Select - Check the radio button to select the folder to share. ¾ Folder - Displays folders that are in current path.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition can access FTP Server while Guest has read-only access to Storage Sharing and cannot access FTP Server. Figure 5-31 User Account Management Only Administrator can use a Web browser to transfer the files from a PC to the Writable shared volume on the USB drive. To add a new user account, please follow the steps below: 1. Click Add New User button, and the screen will appear as shown in Figure 5-32. 2. Self-define a User Name. 3.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Storage Authority – Choose Read and Write or Read Only from the drop-down list to assign access authority of Storage Sharing to the user. ¾ Save - You can click the Save button to save your settings. ¾ Back - You can click the Back button to discard the settings and just go to the media server configuration page. ) Note: Please restart the service for the new settings to take effect.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 5-34 ¾ Diagnostic Tools Diagnostic Tool - Check the radio button to select one diagnostic tool. x Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to a given host or gateway. x Traceroute - This diagnostic tool tests the performance of a connection. ) Note: You can use ping/traceroute to test both numeric IP address or domain name.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition The Diagnostic Results page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of the Internet is fine. Figure 5-35 Diagnostic Results ) Note: Only one user can use this tool at one time. Options “Number of Pings”, “Ping Size” and “Ping Timeout” are used for Ping function. Option “Tracert Hops” are used for Tracert function. 5.10.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ) Note: 1. New firmware versions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the Router rather than the configuration, you can try to upgrade the firmware. 2.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 5-38 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To upgrade the Router's configuration, follow these instructions. x Click the Browse… button to locate the update file for the Router, or enter the exact path to the Setting file in the text box. x Click the Restore button.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 5.10.6 Password Choose menu “System Tools ė Password”, and then you can change the factory default user name and password of the Router in the next screen as shown in Figure 5-40.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 5.10.7 System Log Choose menu “System Tools ė System Log”, and then you can view the logs of the Router. Figure 5-41 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of current logs manually according to the address and validation information set in Mail Settings. The result will be shown in the later log soon.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Chapter 6. Configuration for Repeater Mode This chapter will show each Web page's key functions and the configuration way for Repeater Mode of TL-WR710N. 6.1 Login After your successful login, you can configure and manage the device. There are main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus. On the right, there are the corresponding explanations and instructions.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 6-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ Wired - This field displays the current settings or information for the LAN, you can configure them in the Network > LAN page. x MAC address - The physical address of the Router, as seen from the LAN. x IP address - The LAN IP address of the Router.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x Channel Width - The current wireless channel width in use. x MAC Address - The physical address of the Router, as seen from the WLAN. ¾ Traffic Statistics - The Router’s traffic statistics. x Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port. x Received (Packets) - Traffic that counted in packets has been received out from the WAN port.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 6.5 Network Figure 6-4 the Network menu There is only one submenu under the Network menu (shown in Figure 6-4): LAN. 6.5.1 LAN Choose menu “Network ė LAN”, and then you can configure the IP parameters of the LAN on the screen as below.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 6.6 Wireless Figure 6-6 Wireless menu There are five submenus under the Wireless menu (shown in Figure 6-6): Wireless Settings, Wireless Security, MAC Filtering, Wireless Advanced and Wireless Statistics. Click it, and you will be able to configure the corresponding function. 6.6.1 Wireless Settings Choose menu “Wireless ė Wireless Settings”, and then you can configure the basic settings for the wireless network on this page.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ¾ MAC Address of Root AP - The MAC address of AP that you want to access. ¾ Survey - Click this button, you can search the AP which runs in the environment. ¾ Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 2. Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the Router. 6.6.2 Wireless Security Choose menu “Wireless ė Wireless Security”, and then you can configure the security settings of your wireless network. There are three wireless security modes supported by the Router: WPA/WPA2-Personal, WPA/WPA2-Enterprise and WEP (Wired Equivalent Privacy).
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's capability and request. x Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select either Automatic, or TKIP or AES as Encryption. ) Note: If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you will find a notice in red as shown in Figure 6-10.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x WEP Key (Password) - Select which of the four keys will be used and enter the matching WEP key that you create. Make sure these values are identical on all wireless stations in your network. x Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption. "Disabled" means this WEP key entry is invalid.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 6-12 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-0B. 2. Give a simple description for the wireless station in the Description field. For example: Wireless station A.
TL-WR710N 4. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Add New... button. x Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field. x Enter wireless station A/B in the Description field. x Select Enabled in the Status pull-down list. x Click the Save button. x Click the Back button. The filtering rules that configured should be similar to the following list: 6.6.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Fragmentation Threshold - This value is the maximum size determining whether packets will be fragmented. Setting the Fragmentation Threshold too low may result in poor network performance because of excessive packets. 2346 is the default setting and is recommended. ¾ DTIM Interval - This value determines the interval of the Delivery Traffic Indication Message (DTIM).
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ¾ Received Packets - Packets received by the station ¾ Sent Packets - Packets sent by the station ¾ Configure - The button is used for loading the item to the Wireless MAC Filtering list. You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 6-16 DHCP Settings ¾ DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually. ¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 6-17 DHCP Settings 6.7.2 DHCP Client List Choose menu “DHCP ė DHCP Client List”, and then you can view the information about the clients attached to the Router in the screen as shown in Figure 6-18.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 6-19 Address Reservation ¾ MAC Address - The MAC address of the PC for which you want to reserve an IP address. ¾ Reserved IP Address - The IP address reserved for the PC by the Router. ¾ Status - The status of this entry either Enabled or Disabled. ¾ Modify - To modify or delete an existing entry. To Reserve an IP address: 1. Click the Add New… button. Then Figure 6-19 will pop-up. 2.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 6.8 USB Settings Figure 6-21 The USB Settings menu There are three submenus under the USB Settings menu (shown in Figure 6-21), Storage Sharing, Media Server and User Accounts. Click any of them, and you will be able to configure the corresponding functions. 6.8.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Shared - Indicates the shared or non-shared status of the volume. When the volume is shared, you can click the Disable to stop sharing the volume; when volume is non-shared, you can click the Enable button to share the volume. Click the Start button to start the Network Sharing service. Click the Stop button to stop the Network Sharing service.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 6.8.2 Media Server Choose menu “USB SettingsėMedia Server”, you can create media server that allows you to share stored content with other computers and devices on your home network and on the Internet. Figure 6-24 Media Server Setting ¾ Server Name - The name of this Media Server. ¾ Server Status - Indicates the Media Server’s current status, started or stopped.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 6-26 Media Server Setting 3. Click the Add share folder button to specify a folder as the search path of media server. The screen will then appear as shown in Figure 6-27. Figure 6-27 Add New Folder ¾ Display Name - You can enter a display name for the share folder. ¾ Share entire partition - Choose this option and then the folders contained in this partition will all be shared.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4. Click the Scan All button to scan all the share folders immediately. You can also select the Auto-scan, at same time, select an auto scan interval time by drop-down list. In this case, the media server will auto scan the share folders. ) Note: The max share folders number is 6. If you want share a new folder when the number has been reached to be 6, you can delete a share folder and then add a new one. 6.8.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 6-29 Add or Modify User Account ¾ User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not exceeding 15 characters in length. ¾ Password - Enter the password in the Password field. The password must be composed of alphanumeric symbols not exceeding 15 characters in length. For security purposes, the password for each user account is not displayed.
TL-WR710N 6.9 150Mbps Wireless N Mini Pocket Router - Advanced Edition System Tools Figure 6-30 The System Tools menu Choose menu “System Tools”, and then you can see the submenus under the main menu: Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot, Password, and System Log. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 6.9.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to a given host or gateway. x Traceroute - This diagnostic tool tests the performance of a connection. ) Note: You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address is successful, but pinging/tracerouting the domain name is not, you might have a name resolution problem.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 6-33 Firmware Upgrade ¾ Firmware Version - This displays the current firmware version. ¾ Hardware Version - This displays the current hardware version. The hardware version of the upgrade file must accord with the Router’s current hardware version. To upgrade the Router's firmware, follow these instructions below: 1. Download a more recent firmware upgrade file from the TP-LINK website (http://www.tp-link.com). 2.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 6-34 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. ¾ The default User Name: admin ¾ The default Password: admin ¾ The default IP Address: 192.168.0.254 ¾ The default Subnet Mask: 255.255.255.0 ) Note: All changed settings will be lost when defaults are restored. 6.9.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 6.9.5 Reboot Choose menu “System Tools ė Reboot”, and then you can click the Reboot button to reboot the Router via the next screen. Figure 6-36 Reboot the Router Some settings of the Router will take effect only after rebooting, including: ¾ Change the LAN IP Address (system will reboot automatically). ¾ Change the DHCP Settings. ¾ Change the Wireless configurations. ¾ Change the Web Management Port.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ) Note: The new user name and password must not exceed 14 characters in length and not include any spaces. Enter the new Password twice to confirm. Click the Save button when finished. Click the Clear All button to clear all. 6.9.7 System Log Choose menu “System Tools ė System Log”, and then you can view the logs of the Router. Figure 6-38 System Log ¾ Refresh - Refresh the page to show the latest log list.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Chapter 7. Configuration for Client Mode This chapter will show each Web page's key functions and the configuration way for Client Mode of TL-WR710N. 7.1 Login After your successful login, you can configure and manage the device. There are main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus. On the right, there are the corresponding explanations and instructions.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 7-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ Wired - This field displays the current settings or information for the LAN, you can configure them in the Network > LAN page. x MAC address - The physical address of the Router, as seen from the LAN. x IP address - The LAN IP address of the Router.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x Channel Width - The current wireless channel width in use. x MAC Address - The physical address of the Router, as seen from the WLAN. ¾ Traffic Statistics - The Router’s traffic statistics. x Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port. x Received (Packets) - Traffic that counted in packets has been received out from the WAN port.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 7.5 Network Figure 7-4 the Network menu There is only one submenu under the Network menu (shown in Figure 7-4): LAN. 7.5.1 LAN Choose menu “Network ė LAN”, and then you can configure the IP parameters of the LAN on the screen as below.
TL-WR710N 3. 150Mbps Wireless N Mini Pocket Router - Advanced Edition When you choose the Smart IP (DHCP) mode, the DHCP Server function will be disabled. 7.6 Wireless Figure 7-6 Wireless menu There are two submenus under the Wireless menu (shown in Figure 7-6): Wireless Settings and Wireless Security. Click any of them, and you will be able to configure the corresponding function. 7.6.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Enable Wireless Radio - The wireless radio of the AP can be enabled or disabled to allow or deny wireless stations to access. If enabled, the wireless stations will be able to access the AP, otherwise, wireless stations will not be able to access the AP. ¾ Survey - Click this button, you can search the APs. ) Note: 1.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 7-8 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly recommended to choose one of the following modes to enable security. ¾ WPA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared passphrase.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 7-9 ¾ WPA /WPA2-Enterprise - It’s based on Radius Server. x Version - you can choose the version of the WPA security from the pull-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. x Encryption - You can select Automatic, TKIP or AES. x Radius Server IP - Enter the IP address of the Radius server.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type. 7.7 DHCP Figure 7-10 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 7-10), DHCP Settings, DHCP Client List and Address Reservation.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end address.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 7-13 DHCP Clients List ¾ Client Name - The name of the DHCP client ¾ MAC Address - The MAC address of the DHCP client ¾ Assigned IP - The IP address that the Router has allocated to the DHCP client ¾ Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired, a new dynamic IP address will be automatically assigned to the user. You cannot change any of the values on this page.
TL-WR710N 2. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal notation) of the computer for which you want to reserve an IP address. 3. Click the Save button. Figure 7-15 Add or Modify an Address Reservation Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 7-17 Storage Sharing ¾ Service Status - Indicates the Network Sharing service's current status. You can click the Start button to start the Storage Sharing service and click the Stop button to stop it. ¾ Volume - The volume name of the USB drive the users have access to. Volume 1-8 is mapping to USB port1, and Volume 9-16 is mapping to USB port2. ¾ Capacity - The storage capacity of the USB driver.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Rescan button to start a new scan. Follow the instructions below to set up your router as a file server: 1. Plug an external USB hard disk drive or USB flash drive into this router. 2. Click the Rescan button to find the USB drive that has been attached to the router. 3. Click the Start button to start the Storage Sharing service. 4. Click the Enable button under Shared to enable the disk to share. 5.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Delete - You can delete the share folder by click Delete. To set up your media server, please follow the instructions below: 1. Plug an external USB hard disk drive or USB flash drive into this router, and then the screen will appear as shown in Figure 7-20. Figure 7-20 Media Server Setting 2. Click the Start button to start the media server, and then the screen will appear as shown in Figure 7-21. Figure 7-21 Media Server Setting 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 7-22 Add New Folder ¾ Display Name - You can enter a display name for the share folder. ¾ Share entire partition - Choose this option and then the folders contained in this partition will all be shared. ¾ Folder Location- Displays the location of this folder. ¾ Select - Check the radio button to select the folder to share. ¾ Folder - Displays folders that are in current path.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition can access FTP Server while Guest has read-only access to Storage Sharing and cannot access FTP Server. Figure 7-23 User Account Management Only Administrator can use a Web browser to transfer the files from a PC to the Writable shared volume on the USB drive. To add a new user account, please follow the steps below: 1. Click Add New User button, and the screen will appear as shown in Figure 7-23. 2. Self-define a User Name. 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ¾ Save - You can click the Save button to save your settings. ¾ Back - You can click the Back button to discard the settings and just go to the media server configuration page. ) Note: Please restart the service for the new settings to take effect. If you cannot use the new user name and password to access the shares, press Windows logo + R to open the Run dialog box and type net use \\192.168.0.254 /delete /yes and press Enter. (192.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 7-26 ¾ Diagnostic Tools Diagnostic Tool - Check the radio button to select one diagnostic tool. x Ping - This diagnostic tool troubleshoots connectivity, reachability, and name resolution to a given host or gateway. x Traceroute - This diagnostic tool tests the performance of a connection. ) Note: You can use ping/traceroute to test both numeric IP address or domain name.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Traceroute Max TTL - The max number of hops for a Traceroute connection. The default is 20. Click Start to check the connectivity of the Internet. The Diagnostic Results page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of the Internet is fine. Figure 7-27 Diagnostic Results ) Note: Only one user can use this tool at one time.
TL-WR710N 2. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Type the path and file name of the update file into the File field, or click the Browse button to locate the update file. 3. Click the Upgrade button. ) Note: 1. New firmware versions are posted at http://www.tp-link.com and can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 7-30 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To upgrade the Router's configuration, follow these instructions. x Click the Browse… button to locate the update file for the Router, or enter the exact path to the Setting file in the text box. x Click the Restore button.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 7.9.6 Password Choose menu “System Tools ė Password”, and then you can change the factory default user name and password of the Router in the next screen as shown in Figure 7-32.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 7.9.7 System Log Choose menu “System Tools ė System Log”, and then you can view the logs of the Router. Figure 7-33 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of current logs manually according to the address and validation information set in Mail Settings. The result will be shown in the later log soon.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Chapter 8. Configuration for WISP Client Router Mode This chapter will show each Web page's key functions and the configuration way for WISP Client Router Mode of TL-WR710N. 8.1 Login After your successful login, you can configure and manage the device. There are main menus on the left of the web-based utility. Submenus will be available after you click one of the main menus.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-2 Status ¾ Firmware Version - The version information of the Router’s firmware. ¾ Hardware Version - The version information of the Router’s hardware. ¾ LAN - This field displays the current settings or information for the LAN, you can configure them in the Network > LAN page.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x MAC Address - The physical address of the Router, as seen from the LAN. x IP Address - The LAN IP address of the Router. x Subnet Mask - The subnet mask associated with LAN IP address. ¾ Wireless - This field displays basic information or status for wireless function, you can configure them in the Wireless > Wireless Settings page. x Working Mode - The current wireless working mode in use.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x Subnet Mask - The subnet mask associated with the WAN IP Address. Click the Release to delete the network parameters, and click the Renew button to obtaining network parameters. ¾ Traffic Statistics - The Router’s traffic statistics. x Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port. x Received (Packets) - Traffic that counted in packets has been received out from the WAN port.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition WISP Client Router - In this mode, the device enables multiple users to share Internet connection from WISP. 8.5 Network Figure 8-4 The Network menu There are three submenus under the Network menu (shown in Figure 8-4): WAN, MAC Clone and LAN. Click any of them, and you will be able to configure the corresponding function. 8.5.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Use These DNS Servers - If your ISP gives you one or two DNS addresses, select Use These DNS Servers and enter the primary and secondary addresses into the correct fields. Otherwise, the DNS servers will be assigned dynamically from your ISP.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal notation provided by your ISP. Click the Save button to save your settings. 3. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x Dynamic IP - You can check this radio button to use Dynamic IP as the secondary connection to connect to the local area network provided by ISP. x Static IP - You can check this radio button to use Static IP as the secondary connection to connect to the local area network provided by ISP.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-8 PPPoE Advanced Settings ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Service Name/AC Name - The service name and AC (Access Concentrator) name should not be configured unless you are sure it is necessary for your ISP. In most cases, leaving these fields blank will work.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-9 WAN – BigPond Cable ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Auth Server - Enter the authenticating server IP address or host name. ¾ Auth Domain - Type in the domain suffix server name based on your location, ¾ MTU Size - The default MTU size is “1480” bytes, which is usually fine.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition after a specified inactivity period and re-established when you attempt to access the Internet again. Click the Connect button to connect immediately. Click the Disconnect button to disconnect immediately. Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle Time because some applications are visiting the Internet continually in the background. Click the Save button to save your settings. 5.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Connect on Demand - You can configure the Router to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, check the radio button.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-11 WAN – PPTP/Russia PPTP ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name. If you choose static IP and enter the domain name, you should also enter the DNS assigned by your ISP. And click the Save button.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the Router is disconnected. To use this option, check the radio button. ¾ Connect Manually - You can configure the Router to make it connect or disconnect manually.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Save button to save your settings. ) Note: 1. Only the PC on your LAN can use the MAC Address Clone function. 2. If you change WAN MAC Address when the WAN connection is PPPoE, it will not take effect until the connection is re-established. 8.5.3 LAN Choose menu “Network ė LAN”, and then you can configure the IP parameters of the LAN on the screen as below.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 8.6 Wireless Figure 8-14 Wireless menu There are five submenus under the Wireless menu (shown in Figure 8-14): Wireless Settings, Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click any of them, and you will be able to configure the corresponding function. 8.6.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition WPA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared passphrase. x Version - you can choose the version of the WPA-PSK security on the drop-down list. The default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's capability and request.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x WEP Key Format - Hexadecimal and ASCII formats are provided here. Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. ASCII format stands for any combination of keyboard characters in the specified length. x WEP Key (Password) - Select which of the four keys will be used and enter the matching WEP key that you create.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 8.6.2 Wireless Security Figure 8-17 Wireless Security ¾ Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. But it’s strongly recommended to choose one of the following modes to enable security. ¾ WPA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared passphrase.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-18 ¾ WPA /WPA2-Enterprise - It’s based on Radius Server. x Version - you can choose the version of the WPA security from the pull-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2) automatically based on the wireless station's capability and request. x Encryption - You can select Automatic, TKIP or AES. x Radius Server IP - Enter the IP address of the Radius server.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters. ) Note: If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type. Be sure to click the Save button to save your settings on this page. 8.6.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-0B. 2. Give a simple description for the wireless station in the Description field. For example: Wireless station A. 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-21 Filtering Rules 8.6.4 Wireless Advanced Choose menu “Wireless ė Wireless Advanced”, and then you can configure the advanced settings of your wireless network. Figure 8-22 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. You can select High, Middle or Low which you would like. High is the default setting and is recommended.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition broadcast and multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval. ¾ Enable WMM - WMM function can guarantee the packets with high-priority messages being transmitted preferentially.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button. If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page. ) Note: This page will be refreshed automatically every 5 seconds. 8.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address. ¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end address.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Refresh button. 8.7.3 Address Reservation Choose menu “DHCP ė Address Reservation”, and then you can view and add a reserved address for clients via the next screen (shown in Figure 8-27).
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3. Click the Save button. Click the Enable/Disable All button to make all entries enabled/disabled. Click the Delete All button to delete all entries. Click the Next button to go to the next page and Click the Previous button to return the previous page. 8.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Volume - The volume name of the USB drive the users have access to. Volume 1-8 is mapping to USB port1, and Volume 9-16 is mapping to USB port2. ¾ Capacity - The storage capacity of the USB driver. ¾ Used - The used space of the USB driver. ¾ Free - The available space of the USB driver. ¾ Use% - The percentage of the used space. ¾ Shared - Indicates the shared or non-shared status of the volume.
TL-WR710N 3. 150Mbps Wireless N Mini Pocket Router - Advanced Edition To unplug the USB drive, click Eject Disk button first. Simply pulling USB drive out of the USB port can cause damage to the device and loss of data. 4. Mounted volumes of each USB port are subject to the 8-volume limit. So you cannot access more than 8 volumes on the USB storage device. 5.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 2. Click the Start button to start the media server, and then the screen will appear as shown in Figure 8-34. Figure 8-34 Media Server Setting 3. Click the Add share folder button to specify a folder as the search path of media server. The screen will then appear as shown in Figure 8-35. Figure 8-35 Add New Folder ¾ Display Name - You can enter a display name for the share folder.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Back - Click this button to discard the settings and just go to the media server configuration page. 4. Click the Scan All button to scan all the share folders immediately. You can also select the Auto-scan, at same time, select an auto scan interval time by drop-down list. In this case, the media server will auto scan the share folders. ) Note: The max share folders number is 6.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-37 Add or Modify User Account ¾ User Name - Type the user name that you want to give access to the USB drive. The user name must be composed of alphanumeric symbols not exceeding 15 characters in length. ¾ Password - Enter the password in the Password field. The password must be composed of alphanumeric symbols not exceeding 15 characters in length. For security purposes, the password for each user account is not displayed.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition There are four submenus under the Forwarding menu (shown in Figure 8-38): Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function. 8.9.1 Virtual Servers Choose menu “Forwarding ė Virtual Servers”, and then you can view and add virtual servers in the screen as shown in Figure 8-39.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4. Select the protocol used for this application, either TCP, UDP, or All. 5. Select the Enable to enable the virtual server. 6. Click the Save button. Figure 8-40 Add or Modify a Virtual Server Entry ) Note: If your computer or server has more than one type of available service, please select another service, and enter the same IP Address for that computer or server. To modify or delete an existing entry: 1.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition with a pure NAT Router. Port Triggering is used for some of these applications that can work with an NAT Router. Figure 8-41 Port Triggering Once the Router is configured, the operation is as follows: 1. A local host makes an outgoing connection using a destination port number defined in the Trigger Port field. 2.
TL-WR710N 4. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP, or All. 5. Select Enable in Status field. 6. Click the Save button to save the new rule. Figure 8-42 Add or Modify a Port Triggering Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. Modify the information. 3.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-43 DMZ To assign a computer or server to be a DMZ server: 1. Check the Enable radio button. 2. Enter the IP Address of a local host in the DMZ Host IP Address field. 3. Click the Save button. ) Note: After you set the DMZ host, the firewall related to the host will not work. 8.9.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition x Status - The status of the port is displayed here. “Enabled” means that the port is still active. Otherwise, the port is inactive. Click Refresh to update the Current UPnP Settings List. 8.10Security Figure 8-45 The Security menu There are four submenus under the Security menu as shown in Figure 8-45: Basic Security, Advanced Security, Local Management and Remote Management.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition traffic passing through the session conforms to the protocol. SPI Firewall is enabled by factory default. If you want all the computers on the LAN exposed to the outside world, you can disable it. ¾ VPN - VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec, PPTP, or L2TP protocols to pass through the Router’s firewall.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-47 ¾ Advanced Security Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets statistics. The result of the statistics is used for analysis by SYN Flood, UDP Flood and ICMP-Flood. ¾ DoS Protection - Denial of Service protection.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD Attack Filtering. ¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set value, the Router will startup the blocking function immediately. ¾ Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping Packet From WAN Port.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition use the password to browse the built-in web pages to perform Administrator tasks while all the others will be blocked. After click the Add button, your PC's MAC Address will be placed in the list above. Click the Save button to save your settings. ) Note: If your PC is blocked but you want to access the Router again, press and hold the WPS button for more than 5 seconds to reset the Router to factory defaults. 8.10.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 8.11 Parental Control Choose menu “Parental Control”, and you can configure the parental control in the screen as shown in Figure 8-50. The Parental Control function can be used to control the internet activities of the child, limit the child to access certain websites and restrict the time of surfing.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 4. Enter the allowed domain name of the website, either the full name or the keywords (e.g. google) in the Allowed Domain Name field. Any domain name with keywords in it (e.g.www.google.com) will be allowed. 5. Select from the Effective Time drop-down list the schedule (e.g. Schedule_1) you want the entry to take effect.
TL-WR710N 2. 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click “Access Restriction ĺ Schedule” on the left to enter the Schedule Settings page. Click Add New... button to create a new schedule with Schedule Description is Schedule_1, Day is Sat and Time is all day-24 hours. 3. 4. Click “Parental Control” menu on the left to go back to the Add or Modify Parental Control Entry page: z Click Add New... button. z Enter 00-11-22-33-44-AA in the MAC Address of Child PC field.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-54 Access Control Rule Management ¾ Enable Internet Access Restriction - Select the check box to enable the Internet Access Restriction function, so the Default Filter Policy can take effect. ¾ Rule Name - Here displays the name of the rule and this name is unique. ¾ Host - Here displays the host selected in the corresponding rule. ¾ Target - Here displays the target selected in the corresponding rule.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 6. In the Action field, select Deny or Allow. 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click the Save button. Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list. Click the Delete All button to delete all the entries in the table. You can change the entry’s order as desired.
TL-WR710N z 150Mbps Wireless N Mini Pocket Router - Advanced Edition In Rule Name field, create a name for the rule. Note that this name should be unique, for example Rule_1. z In Host field, select Host_1. z In Target field, select Target_1. z In Schedule field, select Schedule_1. z In Action field, select Allow. z In Status field, select Enabled. z Click Save to complete the settings. Then you will go back to the Access Restriction Rule Management page and see the following list.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 2) In LAN IP Address field, enter the IP address. z If you select MAC Address, the screen shown is Figure 8-59. 1) In Host Description field, create a unique description for the host (e.g. Host_1). 2) In MAC Address field, enter the MAC address. 3. Click the Save button to complete the settings. Click the Delete All button to delete all the entries in the table.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-60 Host Settings 8.12.3 Target Choose menu “Access Control ė Target”, you can view and set a Target list in the screen as shown in Figure 4-65. The target list is necessary for the Access Restriction Rule. Figure 8-61 Target Settings ¾ Target Description - Here displays the description about the target and this description is unique. ¾ Information - The target can be IP address, port, or domain name.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 2) In Domain Name field, enter the domain name, either the full name or the keywords (for example Google) in the blank. Any domain name with keywords in it (e.g.www.google.com) will be blocked or allowed. You can enter 4 domain names. 3. Click the Save button. Click the Delete All button to delete all the entries in the table. Click the Next button to go to the next page, or click the Previous button return to the previous page.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Then you will go back to the Target Settings page and see the following list, Figure 8-64 Target Settings 8.12.4 Schedule Choose menu “Access Control ė Schedule”, you can view and set a Schedule list in the next screen as shown in Figure 8-65. The Schedule list is necessary for the Access Restriction Rule.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 8-66 Advanced Schedule Settings For example: If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday, you should first follow the settings below: 1. Click Add New...
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 8.13 Advanced Routing Figure 8-68 The Advanced Routing Menu There are two submenus under the Network menu (shown in Figure 4-72): Static Routing List and System Routing Table. Click any of them, and you will be able to configure the corresponding function. 8.13.1 Static Routing List Choose menu “Static Routing”, and you can configure the static route in the next screen, shown in Figure 8-69.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Subnet Mask - The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion. ¾ Default Gateway - This is the IP Address of the gateway device that allows for contact between the Router and the network or host. 3. Select Enabled or Disabled for this entry on the Status drop-down list. 4. Click the Save button to make the entry take effect.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 8.14Bandwidth Control Figure 8-72 The Bandwidth Control menu There are two submenus under the Bandwidth Control menu as shown in Figure 8-72. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 8.14.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-74 Bandwidth Control Rule List ¾ Description - This is the information about the rules such as address range. ¾ Egress Bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0. ¾ Ingress Bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0. ¾ Enable - This displays the status of the rule.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ¾ Egress Bandwidth - The max and the min upload speed which through the WAN port, default number is 0. ¾ Ingress Bandwidth - The max and the min download speed through the WAN port, default number is 0. Step 3: Click the Save button. 8.15 IP & MAC Binding Figure 8-76 The IP & MAC Binding menu There are two submenus under the IP & MAC Binding menu: Binding Setting and ARP List.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition When you want to add or modify an IP & MAC Binding entry, you can click the Add New button or Modify button, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding entry. Figure 8-78 IP & MAC Binding Setting (Add & Modify) To add IP & MAC Binding entries: 1. Click the Add New.. button. 2. Enter the MAC Address and IP Address. 3. Select the Bind checkbox. 4.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 8.15.2 ARP List To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could configure the items on the ARP list also. This page displays the ARP List; it shows all the existing IP & MAC Binding entries.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition name no matter what your IP address is. Before using this feature, you need to sign up for DDNS service providers such as www.no-ip.com, www.comexe.cn, or www.dyndns.org. The Dynamic DNS client service provider will give you a password or key. 8.16.1 No-IP DDNS If the dynamic DNS Service Provider you select is www.no-ip.com, the page will appear as shown in Figure 8-81.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-82 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: 1. Type the Domain Name received from your dynamic DNS service provider. 2. Type the User Name for your DDNS account. 3. Type the Password for your DDNS account. 4. Click the Login button to log in to the DDNS service. Connection Status -The status of the DDNS service connection is displayed here. Click Logout to log out of the DDNS service. 8.16.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-83 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Type the User Name for your DDNS account. 2. Type the Password for your DDNS account. 3. Type the Domain Name you received from dynamic DNS service provider here. 4. Click the Login button to log in to the DDNS service. Connection Status -The status of the DDNS service connection is displayed here. Click Logout to logout of the DDNS service. 8.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Statistics. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 8.17.1 Time Settings You can set time manually or get GMT from the Internet for the router on this page: Figure 8-85 Time Settings ¾ ¾ ¾ Time Zone - Select your local time zone from this pull-down list. Date - Enter your local date in MM/DD/YY into the right blanks.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition The router will obtain GMT automatically from Internet if it has already connected to Internet. 8.17.2 Diagnostic Choose menu “System Tools ė Diagnostic”, you can transact Ping or Traceroute function to check connectivity of your network in the following screen. Figure 8-86 ¾ Diagnostic Tools Diagnostic Tool - Check the radio button to select one diagnostic too.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no reply in the specified time, the connection is overtime. ¾ Traceroute Max TTL - The max number of hops for a Traceroute connection. Click Start to check the connectivity of the Internet. The Diagnostic Results page displays the result of diagnosis. If the result is similar to the following screen, the connectivity of the Internet is fine.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ) Note: 1. When you upgrade the router's firmware, you will lose current configuration settings, so make sure you backup the router’s settings before you upgrade its firmware. 2. Make sure that your computer is connected to the Internet through the cable when you upgrade the firmware. To upgrade through wireless connection is not allowed. 3. Set your IP address as static IP before upgrading.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 8.17.5 Backup & Restore This page allows you to save current configuration of router as backup or restore the configuration file you saved before. Figure 8-90 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To restore the router's configuration, follow these instructions: x Click the Browse button to select the backup file which you want to restore.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition ¾ Upgrade the firmware of the router (system will reboot automatically). ¾ Restore the router's settings to factory default (system will reboot automatically). 8.17.7 Password This page allows you to change the factory default user name and password of the router. Figure 8-92 Password It is recommended strongly that you change the factory default user name and password of the router.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition 8.17.8 System Log This page allows you to query the logs of the router. Figure 8-93 System Log ¾ Refresh - Refresh the page to show the latest log list. ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of current logs manually according to the address and validation information set in Mail Settings. The result will be shown in the later log soon.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure 8-94 Statistics ¾ Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click the Enable button. If disabled, the function of DoS protection in Security settings will be ineffective. ¾ Packets Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval indicates the time section of the packets statistic.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Appendix A: FAQ 1. How do I configure the Router to access the Internet by ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. The telephone cord plugs into the Line port of the ADSL Modem. 3) Log in to the Router, click the “Network” menu on the left of your browser, and click "WAN" submenu.
TL-WR710N 2. 150Mbps Wireless N Mini Pocket Router - Advanced Edition How do I configure the Router to access the Internet by Ethernet users? 1) Log in to the Router, click the “Network” menu on the left of your browser, and click "WAN" submenu. On the WAN page, select “Dynamic IP” for "WAN Connection Type", finish by clicking Save. 2) Some ISPs require that you register the MAC Address of your adapter, which is connected to your cable/DSL Modem during installation.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure A-4 Virtual Servers Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. 4) How to enable DMZ Host: Log in to the Router, click the “Forwarding” menu on the left of your browser, and click "DMZ" submenu. On the "DMZ" page, click Enable radio button and type your IP address into the “DMZ Host IP Address” field, using 192.168.0.
TL-WR710N 2) 150Mbps Wireless N Mini Pocket Router - Advanced Edition To change the WEB management port number: Log in to the Router, click the “Security” menu on the left of your browser, and click "Remote Management" submenu. On the "Remote Management" page, type a port number except 80, such as 88, into the "Web Management Port" field. Click Save and reboot the Router. Figure A-7 Remote Management ) Note: If the above configuration takes effect, configure to the Router by typing 192.168.0.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure A-9 Add or Modify a Virtual server Entry 5. The wireless stations cannot connect to the Router. 1) Make sure the "Enable Wireless Router Radio" is checked. 2) Make sure that the wireless stations' SSID accord with the Router's SSID. 3) Make sure the wireless stations have right KEY for encryption when the Router is encrypted.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Appendix B: Configuring the PC In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary. 1. Configure TCP/IP component 1) On the Windows taskbar, click the Start button, and then click Control Panel.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure B-0-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Figure B-0-3 ) Note: For Windows 98 OS or before, the PC and Router may need to be restarted. 7) Click OK to keep your settings.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Appendix C: Specifications General Standards IEEE 802.11n, 802.11b, 802.
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increased range by exploiting the spatial diversity, perhaps through coding schemes like Alamouti coding. The Enhanced Wireless Consortium (EWC) [3] was formed to help accelerate the IEEE 802.
TL-WR710N ¾ 150Mbps Wireless N Mini Pocket Router - Advanced Edition PPPoE (Point to Point Protocol over Ethernet) - PPPoE is a protocol for connecting remote hosts to the Internet over an always-on connection by simulating a dial-up connection. ¾ SSID - A Service Set Identification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same SSID.
