User's Guide
TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition
- 204 -
¾ WPA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared
passphrase.
x Version- you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select
WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
x Encryption- When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.
)
Note:
If you check the WPA-PSK/WPA2-PSK radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-22.
Figure 8-16
¾ WPA /WPA2-Enterprise - It’s based on Radius Server.
x Version- you can choose the version of the WPA security from the pull-down list. The
default setting is Automatic, which can select
WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
x Encryption -You can select Automatic, TKIP or AES.
x Radius Server IP - Enter the IP address of the Radius server.
x Radius Port - Enter the port that Radius server used.
x Radius Password - Enter the password for the Radius server.
x Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
¾ WEP - It is based on the IEEE 802.11 standard.
x Type - you can choose the type for the WEP security on the pull-down list. The default
setting is Automatic, which can select
Shared Keyor Open Systemauthentication type
automatically based on the wireless station's capability and request.