User's Manual

TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
1.4 Panel Layout
1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs and the WPS button are located on the front panel (View from left to right).
Name Status Indication
(Power)
Off Power is off.
On
Power is on.
Flash The device is initializing or upgrading.
(WLAN)
Off The Wireless function is disabled.
On The Wireless function is working properly.
(LAN4-1)
Off No device are connected to the corresponding port.
On
A device is connected to the corresponding port.
(WAN)
Off The WAN port is not connected.
Orange
The WAN port is connected, but there is no Internet
connection.
Green
The router is connected to the Internet.
(WPS)
Slow Flash
WPS function is in progress. The device is trying to
connect or to be connected.
This process may take up
to 2 minutes.
On
A device is successfully added to the network by WPS
function.
Quick Flash
A wir
eless device failed to be added to the network by
WPS function.
Table 1-1 The LEDs description

Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.
4