User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: FAQ
- Appendix B: Configuring the PCs
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
Wireless Security - You can configure the security of Guest Network here.
Access Time - During this time the wireless stations could accessing the AP.
Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page “Bandwidth Control->Control Settings”.
4.8 DHCP
Figure 4-28 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-28): DHCP Settings, DHCP
Client List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
4.8.1 DHCP Settings
Choose menu “DHCP
→
DHCP Settings”, and then you can configure the DHCP Server on the
page (shown in
Figure 4-29).The Router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the Router on the LAN.
Figure 4-29 DHCP Settings
DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must configure the computer
manually.
43