User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Repeater Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for WISP Client Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR80
2N
300
Mbps Wireless N Nano Router
D
HCP service function.
S
tatic address assignment of DHCP server.
W
eb Service Port of the router.
U
pgrade the firmware of the router (system will reboot automatically).
Restore the router's settings to factory default (system will reboot automatically).
4.17.7 Password
T
his page allows you to change the factory default user name and password of the router.
F
igure 4-87 Password
It is recommended strongly that you change the factory default user name and password of the
router. All users who try to access the router's Web-based utility or Quick Setup will be prompted
N
ote:
The new user name and password must not exceed 14 characters in length and must not include
any spaces. Enter the new Password twice to confirm it.
Click the
Save
button when finished.
Click the Clear All button to clear all.
4.17.8 System Log
T
his page allows you to query the logs of the router.
- 97 -