User's Manual

TL-WR80
2N
300
Mbps Wireless N Nano Router
•
V
ersion
- y
ou can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select
W
PA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
• E
ncryption
- W
hen WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.

N
ote:
If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you will find
a notice in red as shown in Figure 5-13.
F
igure 5-13
 WPA /WPA2-Enterprise - It’s based on Radius Server.
•
V
ersion
- y
ou can choose the version of the WPA security from the pull-down list. The
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
•
Encryption - You can select Automatic, TKIP or AES.
•
R
adius Server IP - Enter the IP address of the Radius server.
•
R
adius Port - Enter the port that Radius server used.
•
R
adius Password - Enter the password for the Radius server.
•
G
roup Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 WEP - It is based on the IEEE 802.11 standard.
•
Ty
pe - you can choose the type for the WEP security on the pull-down list. The default
setting is Automatic, which can select
S
hared Key
o
r Open System
aut
hentication type
automatically based on the wireless station's capability and request.
•
W
EP Key Format
- H
exadecimal and
A
SCII formats are provided here
.
H
exadecimal
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.
- 112 -