User's Manual

TL-WR80
2N
300
Mbps Wireless N Nano Router
•
W
EP Key (Password) - Select which of the four keys will be used and enter the matching
WEP key that you create. Make sure these values are identical on all wireless stations in
your network.
• K
ey Type
- Y
ou can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
64-bit -
Y
ou can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.
152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 16 ASCII characters.

N
ote:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
5.7.3 Wireless MAC Filtering
C
hoose menu “Wireless → Wireless MAC Filtering”, and then you can control the wireless
access by configuring the Wireless MAC Filtering function, as shown in Figure 5-14.
F
igure 5-14 Wireless MAC Filtering
T
o filter wireless users by MAC Address, click Enabled. The default setting is Disabled.

M
AC Address - The wireless station's MAC address that you want to access.
 S
tatus - The status of this entry, either Enabled or Disabled.

D
escription - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 5-15:
- 113 -