User's Manual

TL-WR80
2N
300
Mbps Wireless N Nano Router
T
here are six submenus under the Wireless menu (shown in Figure 6-10): Wireless Settings,
Wireless Security, MAC Filtering, Wireless Advanced, Wireless Statistics and Throughput
Monitor. Click it, and you will be able to configure the corresponding function.
6.7.1 Wireless Settings
C
hoose menu “Wireless → Wireless Settings”, and then you can configure the basic settings
for the wireless network on this page.
F
igure 6-11 Wireless Settings - Repeater

W
ireless Name of Root AP - The SSID of AP that you want to access.

M
AC Address of Root AP - The MAC address of AP that you want to access.

S
urvey - Click this button, you can search the AP which runs in the environment.

W
ireless Security Mode - This option should be chosen according to the security
configuration of the AP you want to access. It is recommended that the security type is the
same as your AP’s security type.

W
ireless Password - If the AP your router is going to connect need password, you need to
fill the password in this blank.
Click Survey button on the Wireless page as shown in Figure 6-11, and then AP List page will
appear as shown in Figure 6-12. Find the SSID of the Access Point you want to access, and click
Connect in the corresponding row. For example, the second item is selected. The target network’s
SSID will be automatically filled into the corresponding box which is shown as the Figure 6-11.
- 139 -