User's Manual

TL-WR80
2N
300
Mbps Wireless N Nano Router

N
ote:
If you check the WPA/WPA2-Personal radio button and choose TKIP encryption, you will find
a notice in red as shown in Figure 6-14.
F
igure 6-14
 WPA /WPA2-Enterprise - It’s based on Radius Server.
•
V
ersion
- y
ou can choose the version of the WPA security from the pull-down list. The
default setting is Automatic, which can select
W
PA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
•
En
cryption -
Y
ou can select Automatic, TKIP or AES.
•
Radius Server IP - Enter the IP address of the Radius server.
•
R
adius Port - Enter the port that Radius server used.
•
R
adius Password - Enter the password for the Radius server.
•
G
roup Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 WEP - It is based on the IEEE 802.11 standard.
•
Ty
pe - you can choose the type for the WEP security on the pull-down list. The default
setting is Automatic, which can select
S
hared Key
o
r Open System
aut
hentication type
automatically based on the wireless station's capability and request.
•
W
EP Key Format
- H
exadecimal and
A
SCII formats are provided here
.
H
exadecimal
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.
•
WEP
Key (Password) - Select which of the four keys will be used and enter the matching
WEP key that you create. Make sure these values are identical on all wireless stations in
your network.
•
K
ey Type
- Y
ou can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
- 142 -