User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Repeater Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for WISP Client Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR80
2N
300
Mbps Wireless N Nano Router
F
igure 7-2 Status
F
irmware Version - The version information of the Router’s firmware.
H
ardware Version - The version information of the Router’s hardware.
Wi
red - This field displays the current settings or information for the LAN, you can configure
them in the Network > LAN page.
•
M
AC address - The physical address of the Router, as seen from the LAN.
•
I
P address - The LAN IP address of the Router.
•
S
ubnet Mask - The subnet mask associated with LAN IP address.
W
ireless - This field displays basic information or status for wireless function, you can
configure them in the Wireless > Wireless Settings page.
•
Wo
rking Mode - The current wireless working mode in use.
•
W
ireless Name of Root AP - The SSID of Root AP.
• C
hannel - The current wireless channel in use.
- 161 -