User's Manual

TL-WR80
2N
300
Mbps Wireless N Nano Router
 T
raffic Statistics - The Router’s traffic statistics.
•
R
eceived (Bytes) - Traffic that counted in bytes has been received out from the WAN port.
• R
eceived (Packets) - Traffic that counted in packets has been received out from the WAN
port.
• S
ent (Bytes) - Traffic that counted in bytes has been sent out from the WAN port.
•
S
ent (Packets) - Traffic that counted in packets has been sent out from the WAN port.

S
ystem Up Time - The length of the time since the Router was last powered on or reset.
Click the Refresh button to get the latest status and settings of the Router.
8
.3 Quick Setup
P
lease refer to Section 3.2: "Quick Installation Guide."
8
.4 WPS
W
PS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This
section will guide you to add a new wireless device to an existing network quickly by function. The
WPS function is only available when the Operation Mode is set to Access Point. Select menu
“WPS”, you will see the next screen shown in Figure 5-3.
F
igure 8-3 WPS

W
PS Status - To enable or disable the WPS function here.

Cu
rrent PIN - The current value of the device's PIN is displayed here. The default PIN of the
device can be found in the label or User Guide.

R
estore PIN - Restore the PIN of the device to its default.

G
en New PIN - Click this button, and then you can get a new random value for the device's
PIN. You can ensure the network security by generating a new PIN.

D
isable PIN of this Device - WPS external registrar of entering the device’s PIN can be
disabled or enabled manually. If the device receives multiple failed attempts to authenticate
an external Registrar, this function will be disabled automatically.
- 193 -