User's Manual

TL-WR80
2N
300
Mbps Wireless N Nano Router
 W
PA-PSK/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared
passphrase.
•
V
ersion
- y
ou can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select
W
PA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
•
Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.

N
ote:
If you check the WPA-PSK/WPA2-PSK radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-22.
F
igure 8-20
 WPA /WPA2-Enterprise - It’s based on Radius Server.
•
V
ersion
- y
ou can choose the version of the WPA security from the pull-down list. The
default setting is Automatic, which can select
W
PA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
•
En
cryption -
Y
ou can select Automatic, TKIP or AES.
•
Radius Server IP - Enter the IP address of the Radius server.
•
R
adius Port - Enter the port that Radius server used.
•
Radius Password - Enter the password for the Radius server.
•
G
roup Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 WEP - It is based on the IEEE 802.11 standard.
•
Ty
pe - you can choose the type for the WEP security on the pull-down list. The default
setting is Automatic, which can select
S
hared Key
o
r Open System
aut
hentication type
automatically based on the wireless station's capability and request.
- 211 -