User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Repeater Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for WISP Client Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR80
2N
300
Mbps Wireless N Nano Router
A
ppendix C: Specifications
G
eneral
S
tandards IEEE 802.11n, 802.11b, 802.11g
P
rotocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP
P
ort
One 10/100Mbps LAN/WAN port
One 10/100Mbps LAN port
C
abling Type
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
1
00BASE-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
L
ED SYS
D
imensions (L×W×H) 57mm×57mm×18mm
Safety & Emissions FCC, CE
W
ireless
F
requency
B
and
2.
4~2.4835GHz
R
adio Data Rate
11n:up to 300Mbps(Automatic)
11g:54/48/36/24/18/12/9/6M(Automatic)
11b:11/5.5/2/1M(Automatic)
F
requency Expansion DSSS(Direct Sequence Spread Spectrum)
M
odulation DBPSK, DQPSK, CCK, 16-QAM, 64-QAM, BPSK, QPSK
S
ecurity 64/128/152-bit WEP, WPA/WPA2, WPA2-PSK/WPA-PSK
S
ensitivity @PER
135M: -70dBm@10% PER
65M: -73dBm@10% PER
54M: -76dBm@10% PER
6M: -92dBm@10% PER
M
ode
Wireless Router Mode, Access Point Mode, Repeater Mode,
Client Mode, WISP Client Router Mode
E
nvironmental and Physical
Te
mperature
Operating : 0℃~40℃ (32℉~104℉)
S
torage: -40℃~70℃(-40℉~158℉)
Hu
midity
Operating: 10% - 90% RH, Non-condensing
S
torage: 5% - 90% RH, Non-condensing
- 270 -