User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Repeater Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for WISP Client Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR80
2N
300
Mbps Wireless N Nano Router
W
ireless Security - You can configure the security settings of your wireless network.
•
D
isable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without encryption.
•
WP
A-PSK/WPA2-PSK - Input the password of your broadcast SSID.
• N
o Change - If you chose this option, wireless security configuration will not change.
3. The Finish page is shown as Figure 3-13. Click the Reboot button to make your wireless
configuration take effect and finish the Quick Setup.
F
igure 3-13 Quick Setup – Finish
3.
2.2 Access Point Mode
W
hen you choose Access Point on Working Mode page in Figure 3-5 , take the following steps:
1. Click Next in Figure 3-5, and then Wireless page will appear as shown in Figure 3-14.
Figure 3-14 Quick Setup - Wireless
- 18 -