User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Repeater Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for WISP Client Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR80
2N
300
Mbps Wireless N Nano Router
3. C
lick the Next button. You will then see the Finish page.
F
igure 3-16 Quick Setup - Finish
3.2.3 Repeater Mode
W
hen you choose Repeater Mode on Working Mode page in Figure 3-5 , take the following
steps:
1. Click Next, and then Wireless Repeater page will appear as shown in Figure 3-17.
F
igure 3-17 Quick Setup - Wireless
W
ireless Name of Root AP - The SSID of AP that you want to access.
M
AC Address of Root AP - The MAC address of AP that you want to access.
S
urvey - Click this button, you can search the AP which runs in the environment.
- 20 -