User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Repeater Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for WISP Client Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR80
2N
300
Mbps Wireless N Nano Router
F
igure 3-19 Quick Setup - Finish
3.2.4 Client Mode
W
hen you choose Client on Working Mode page in Figure 3-5 , take the following steps:
1. Click Next in Figure 3-5, and then Wireless Client page will appear as shown in Figure 3-20.
F
igure 3-20 Quick Setup - Wireless
W
ireless Name of Root AP - Enter the SSID that you want to access.
M
AC Address of Root AP - Enter the MAC address of AP that you want to access.
Su
rvey - Click this button, you can survey the AP which runs in the environment.
- 22 -