User's Manual

TL-WR80
2N
300
Mbps Wireless N Nano Router

W
ireless Security Mode - This option should be chosen according to the security
configuration of the AP you want to access. It is recommended that the security type is
the same as your AP’s security type.

W
ireless Password - If the AP your router is going to connect need password, you need
to fill the password in this blank.
2. Click Survey button on the Wireless page as shown in Figure 3-20, and then AP List page will
appear as shown in Figure 3-21. Find the SSID of the Access Point you want to access, and
click Connect in the corresponding row. For example, the second item is selected. The target
network’s SSID will be automatically filled into the corresponding box which is shown as the
Figure 3-20.
Figure 3-21 AP List
3. Click the Next button in Figure 3-22. You will then see the Finish page. Click the Reboot
button to make your wireless configuration take effect and finish the Quick Setup.
F
igure 3-22 Quick Setup - Finish
3.2.5 WISP Client Router Mode
W
hen you choose WISP Client Router Mode on Working Mode page in Figure 3-5 , take the
following steps:
1. Click Next, and then WAN Connection Type page will appear as shown in Figure 3-23.
- 23 -