User's Manual

TL-WR80
2N
300
Mbps Wireless N Nano Router

S
SID (to be bridged) - The SSID of the AP your Router is going to connect to as a client.
You can also use the search function to select the SSID to join.

B
SSID (to be bridged) - The BSSID of the AP your Router is going to connect to as a client.
You can also use the search function to select the BSSID to join.
 Su
rvey - Click this button, you can survey the AP which runs in the current channel.

Se
curity Options - This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as your AP's security
type.

W
EP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It
indicates the index of the WEP key.

A
uth Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It
indicates the authorization type of the Root AP.

P
assword - If the AP your Router is going to connect needs password, you need to fill the
password in this blank.
B
e sure to click the Save button to save your settings on this page.

N
ote:
1. The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Router. For best results, place your Router.

N
ear the center of the area in which your wireless stations will operate.

I
n an elevated location such as a high shelf.

A
way from the potential sources of interference, such as PCs, microwaves, and cordless
phones.

A
way from large metal surfaces.
2. Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Router.
4.7.2 Wireless Security
C
hoose menu “Wireless → Wireless Security”, and then you can configure the security
settings of your wireless network.
There are three wireless security modes supported by the Router: WPA/WPA2-Personal,
WPA/WPA2-Enterprise and WEP (Wired Equivalent Privacy).
- 50 -