User's Manual

TL-WR80
2N
300
Mbps Wireless N Nano Router

In
Rule Name field, create a name for the rule. Note that this name should be unique, for
example Rule_1.

In
Host field, select Host_1.

In Target field, select Target_1.

In
Schedule field, select Schedule_1.

In
Action field, select Allow.

In
Status field, select Enabled.

Cl
ick Save to complete the settings.
Then you will go back to the Access Restriction Rule Management page and see the following list.
F
igure 4-51 Rule Settings
4.12.2 Host
Cho
ose menu “Access Control → Host”, you can view and set a Host list in the screen as
shown in Figure 4-52. The host list is necessary for the Access Restriction Rule.
F
igure 4-52 Host Settings

H
ost Description - Here displays the description of the host and this description is unique.
 I
nformation - Here displays the information about the host. It can be IP or MAC.

M
odify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New… button.
2. In the Mode field, select IP Address or MAC Address.

If
you select IP Address, the screen shown is Figure 4-53.
1) In Host Description field, create a unique description for the host (e.g. Host_1).
- 76 -