User's Guide

TL-WR802N
300Mbps Wireless N Nano Router
- 113 -
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.
152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 16 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
5.7.3 Wireless MAC Filtering
Choose menu “Wireless → Wireless MAC Filtering”, and then you can control the wireless
access by configuring the Wireless MAC Filtering function, as shown in Figure 5-14.
Figure 5-14 Wireless MAC Filtering
To filter wireless users by MAC Address, click Enabled. The default setting is Disabled.
 MAC Address - The wireless station's MAC address that you want to access.
 Status - The status of this entry, either Enabled or Disabled.
 Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 5-15: