User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Range Extender Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for Hotspot Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR802N
300Mbps Wireless N Nano Router
- 139 -
Figure 6-11 Wireless Settings - Range Extender
Wireless Name of Root AP - The SSID of AP that you want to access.
MAC Address of Root AP - The MAC address of AP that you want to access.
Survey - Click this button, you can search the AP which runs in the environment.
Wireless Name of Range Extender – The SSID of your extended network. You can
customize it here.
Wireless Security Mode - This option should be chosen according to the security
configuration of the AP you want to access. It is recommended that the security type is the
same as your AP’s security type.
Wireless Password - If the AP your router is going to connect need password, you need to
fill the password in this blank.
Click Survey button on the Wireless page as shown in Figure 6-11, and then AP List page will
appear as shown in Figure 6-12. Find the SSID of the Access Point you want to access, and click
Connect in the corresponding row. For example, the second item is selected. The target network’s
SSID will be automatically filled into the corresponding box which is shown as the Figure 6-11.
Figure 6-12 AP List
Be sure to click the Save button to save your settings on this page.