User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Range Extender Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for Hotspot Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR802N
300Mbps Wireless N Nano Router
- 6 -
Figure 2-1 Hardware Installation of the TL-WR802N in Wireless Router Mode
1. Connect the LAN/WAN port of TL-WR802N to the wired Internet.
2. Connect TL-WR802N to the power.
2.3.2 Hotspot Router Mode
In hotspot router mode, TL-WR802N enables user to create your personal Wi-Fi hotspot from a
public Wi-Fi network such as in a hotel room, trade show, etc.
On this mode, the LAN port devices share the same IP from public Wi-Fi through Wireless port.
While connecting to public Wi-Fi, the Wireless port works as a WAN port. The LAN/WAN port acts
as a LAN port.
Figure 2-2 Hardware Installation of the TL-WR802N in Hotspot Router Mode
Connect TL-WR802N to the power.