User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Range Extender Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for Hotspot Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR802N
300Mbps Wireless N Nano Router
- 8 -
Figure 2-4 Hardware Installation of the TL-WR802N in Range Extender Mode
Connect TL-WR802N to the power.
2.3.5 Client Mode
TL-WR802N is used as a wireless network card to connect the wireless network signal or wireless
router.
On this mode, the wired port LAN/WAN works as LAN.
Figure 2-5 Hardware Installation of the TL-WR802N in Client Mode
1. Connect the PC to the LAN/WAN port of TL-WR802N router with an Ethernet cable.
2. Connect TL-WR802N to the power.