User's Guide

TL-WR802N
300Mbps Wireless N Nano Router
- 239 -
Figure 8-55 Host Settings
8.12.3 Target
Choose menu “Access Control → Target”, you can view and set a Target list in the screen as
shown in Figure 4-55. The target list is necessary for the Access Restriction Rule.
Figure 8-56 Target Settings
 Target Description - Here displays the description about the target and this description is
unique.
 Information - The target can be IP address, port, or domain name.
 Modify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New… button.
2. In Mode field, select IP Address or Domain Name.
 If you select IP Address, the screen shown is Figure 8-57.
1) In Target Description field, create a unique description for the target (e.g.
Target_1).
2) In IP Address field, enter the IP address of the target.
3) Select a common service from Common Service Port drop-down list, so that the
Target Port will be automatically filled. If the Common Service Port drop-down list
doesn’t have the service you want, specify the Target Port manually.
4) In Protocol field, select TCP, UDP, ICMP or ALL.
 If you select Domain Name, the screen shown is Figure 8-58.
1) In Target Description field, create a unique description for the target (e.g.
Target_1).