User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Range Extender Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for Hotspot Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR802N
300Mbps Wireless N Nano Router
- 17 -
Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without encryption.
WPA-PSK/WPA2-PSK - Input the password of your broadcast SSID.
No Change - If you chose this option, wireless security configuration will not change.
3. The Review Setting page is shown as Figure 3-13. Click the Reboot button to make your
wireless configuration take effect and finish the Quick Setup.
Figure 3-13 Quick Setup – Review Setting
3.2.2 Hotspot Router Mode
When you choose Hotspot Router Mode on Working Mode page in Figure 3-5 , take the
following steps:
1. Click Next, and then WAN Connection Type page will appear as shown in Figure 3-14.