User's Guide
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Range Extender Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for Hotspot Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR802N
300Mbps Wireless N Nano Router
- 26 -
Figure 3-24 Quick Setup - Review Setting
3.2.5 Client Mode
When you choose Client on Working Mode page in Figure 3-5 , take the following steps:
1. AP List page will appear as shown below. Find the SSID of the Access Point you want to
access, and select the choose checkbox in the corresponding row. For example, the 7th item
is selected. The target network’s SSID will be automatically filled into the corresponding box
which is shown as the Figure 3-26.
Figure 3-25 AP List
2. Click Next in Figure 3-25, and then Wireless Setting page will appear as shown in Figure
3-26.
Figure 3-26 Quick Setup - Wireless
Wireless Name of Root AP - Enter the SSID that you want to access.
MAC Address of Root AP - Enter the MAC address of AP that you want to access.