User's Manual

6
Chapter 2
Connect the Hardware
2. 2. 2. Hotspot Router Mode
In Hotspot Router mode, the router enables multiple users to share Internet connection
from WISP.
1. Connect the router according to Step A to B.
2. Use the default Wi-Fi Name and Wi-Fi Password printed on the Wi-Fi Info Card to
connect to the router.
Public Wi-Fi
AB
2. 2. 3. Access Point Mode
Create a wireless network from an Ethernet connection. This mode is suitable for dorm
rooms or homes where there’s already a wired router but you need a wireless hotspot.
1. Connect the router according to Step A to C.
2. Use the default Wi-Fi Name and Wi-Fi Password printed on the Wi-Fi Info Card to
connect to the router.
Note:
If the hotel’s internet has an authentication process, you will need to authenticate it on EACH device.
Internet
Wired Router
A
BC
2. 2. 4. Range Extender Mode
Repeat signal from an existing wireless network. This mode is suitable to extend
wireless coverage, reaching devices that were previously too far from your primary