User's Manual

105
Chapter 5 Configure the Router in Hotspot Router Mode
¾ To add IP & MAC Binding entries:
1. Click Add New.
2. Enter the MAC address and IP address.
3. Tick the Bind checkbox and click Save.
¾ To modify or delete an existing entry:
1. Select the desired entry in the table.
2. Click Edit or Delete Selected.
5. 13. 2. ARP List
To manage a device, you can observe the device on the LAN by checking its MAC
address and IP address on the ARP list, and you can also configure the items. This page
displays the ARP list which shows all the existing IP & MAC Binding entries.
• MAC Address - The MAC address of the listed computer on the LAN.
• IP Address - The assigned IP address of the listed computer on the LAN.
• Status - Indicates whether or not the MAC and IP addresses are bound.
• Configure - Load or delete an item.