User's Manual
135
Chapter 6
Congure the Router in Access Point Mode
• System Name - An administratively-assigned name for this managed node.
• System Description - The software version information for this managed node.
• System Location - The physical location of this node.
• System Contact - The textual identification of the contact person for this managed
node.
• Trap Manage IP - Displays the IP address of the host to receive the traps.
6. 6. 3. Ping WatchDog
The Ping Watch Dog is dedicated for continuous monitoring of the particular connection
to remote host using the Ping tool. It makes the router continuously ping a user defined
IP address (it can be the internet gateway for example). If it is unable to ping under the
user defined constraints, the router will automatically reboot.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools > Ping WatchDog.
3. Configure the settings and click Save.
• Enable - Turn on/off Ping Watch Dog.
• Destination IP - The IP address of the target host where the Ping Watch Dog Utility is
sending ping packets.