User's Manual

Chapter 4

Configure the Router in Wireless Router Mode

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the

router.

2. Go to System Tools > Backup & Restore.

¾ To backup configuration settings:

Click Backup to save a copy of the current settings in your local computer. A “.bin“ file

of the current settings will be stored in your computer.

¾ To restore configuration settings:

1. Click Choose File to locate the backup configuration file stored in your computer, and

click Restore.

2. Wait a few minutes for the restoring and rebooting.

Note:

During the restoring process, do not power off or reset the router.

4. 16. 6. Reboot

Some settings of the router will take effect only after rebooting, including:

• Change the LAN IP Address (system will reboot automatically).

• Change the DHCP Settings.

• Change the Working Modes.

• Change the Web Management Port.

• Upgrade the firmware of the router (system will reboot automatically).

• Restore the router to its factory defaults (system will reboot automatically).

• Update the configuration with the file (system will reboot automatically).

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the

router.

2. Go to System Tools > Reboot.

3. Click Reboot, and wait a few minutes for the router to rebooting.