User's Manual

77
Chapter 5 Configure the Router in Hotspot Router Mode
• Client Settings - The settings of the public Wi-Fi your router is going to connect to.
• SSID(to be bridged) - The SSID of the public Wi-Fi your router is going to
connect to as a client.
• MAC Address(to be bridged) - The MAC address of the public Wi-Fi your router
is going to connect to as a client.
• Scan - Click this button to search the public Wi-Fi.
• Key type - Select the key type according to the public Wi-Fi’s security
configuration. It is recommended that the key type is the same as the public
Wi-Fi’s security type.
• WEP Index - Select which of the four keys will be used if the key type is WEP
(ASCII) or WEP (HEX).
• Authentication Type - Select the authorization type if the key type is WEP
(ASCII) or WEP(HEX).
• Encryption - Select the encryption type is the key type is WPA-PSK or WPA2-
PSK.
• Password - Enter the public Wi-Fi’s password if required.
• AP Settings - The wireless settings of your router.
• Local Wireless Network Name - Enter a string of up to 32 characters. It is
strongly recommended that you change your network name (SSID). This value
is case-sensitive. For example, TEST is NOT the same as test.
• Mode - You can choose the appropriate “Mixed” mode.