User's Manual
Table Of Contents
- Package Contents
- Chapter 1. Introduction
- Chapter 2. Connecting the Router
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuration for Standard Wireless Router Mode
- Chapter 5. Configuration for Access Point Mode
- Chapter 6. Configuration for Repeater Mode
- Chapter 7. Configuration for Client Mode
- Chapter 8. Configuration for Hotspot Router Mode
- Appendix A: FAQ
- Appendix B: Configuring the PC
- Appendix C: Specifications
- Appendix D: Glossary
TL-WR810N
300Mbps Wireless N Mini Router
- 207 -
5. If your ISP provides L2TP connection, please select L2TP/Russia L2TP option. Then you
should enter the following parameters (Figure 8-13):
Figure 8-13 WAN - L2TP/Russia L2TP
User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
Confirm Password - Enter again the Password provided by your ISP to ensure the
password you entered is correct.
Dynamic IP/ Static IP - Choose either as you are given by your ISP. Click the Connect
button to connect immediately. Click the Disconnect button to disconnect immediately.
Server IP Address/Name - Enter server IP address or domain name provided by your
ISP.
IP Address - Enter the IP address used for dial-up. (Only can be configured when Static
IP is selected)
Subnet Mask - Enter the subnet mask provided by your ISP. (Only can be configured
when Static IP is selected)
Gateway - Enter gateway provided by your ISP. (Only can be configured when Static IP
is selected)
DNS - Enter DNS server provided by your ISP. (Only can be configured when Static IP is
selected)