User's Manual

14
Chapter 3 Set Up Internet Connection Via Quick Setup Wizard
4. Relocate the router about halfway between your host AP and the Wi-Fi dead zone.
The extended network shares the same network name and password as your host
network.
3. 2. 4. Client Mode
1. Click Survey to find your host network and click Connect. Enter the host network’s
password in the Wireless Password field, and then click Next.
2. Select the LAN IP type of the router or leave the default setting Smart IP for most
cases, and then click Next.
3. Click Reboot to complete the configuration. Now you can connect your wired-only
device to the router’s LAN or LAN/WAN port using an Ethernet cable.